Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. dessertman

    Outgoing via other IPO over in CSN

    Thanks for the reply and cool comments. Its working after changing to "use internal data" as you suggested.
  2. dessertman

    Outgoing via other IPO over in CSN

    IPO dials correctly. Evaluate the short code and going through ARS. issue is calling number (Ext 713) is not translated to +6612345678123 number is not taking from the SIP tab of the user. How can we add the valid number +6612345678123 when dialing out? Line type between IPOs are as below...
  3. dessertman

    Outgoing via other IPO over in CSN

    In our CSN setup, SIP line is connected to the main IPO. Extensions of the second IPO getting error when dialing-out using the main IPO SIP. Extension dialing between 2 IPOs work fine without any issue. (both IPOs are in the same location, used as a expansion) when traced, we can see only the...
  4. dessertman

    Dial delay count 0

    I am pleased, I have logical escape from this issue. reject 911x. However, why the following code allow external 10 digit dialing as system short code but not as user short code? user short code phones allow dialing of only 4 digits when calling outside and throw "INCOMPLETE". 90N/+66N ARS N;/N/SIP
  5. dessertman

    Dial delay count 0

    Thanks for the help. As you mentioned, I used dial delay count 0 in conjunction with ; to avoid # after dialing. However I am facing another issue with this change. Customer has overlapping extensions. (911, 9115, 9116)so 9115 dial just 911. so reverted to the original setup, dial delay count 4...
  6. dessertman

    Dial delay count 0

    I can understand dial delay count 4 means system wait for 4 digits before short code lookup. so 1 means system lookup per every digit dialed. Whats the meaning of 0?
  7. dessertman

    IPO software upgrade

    Our IPO solution servers (Primary, secondary and expansion) came with the software version 11.1.0.0 Build 237 pre-installed. There are many service packs available for this version but instruction on applying those directed to page unavailable error. For example, Avaya IP Office 11.1 Feature...
  8. dessertman

    System short code getting priority over user short code

    I am facing a strange issue. we have 2 SIP trunks configured with short codes 1. System short codes routed through ARS-SIP1 and 2. User short codes routed through SIP2. This was working fine for some time but issue appear suddenly. When the user who has user short code dials, call tries to go...
  9. dessertman

    Resetting WEBLM Account and Password

    There is no Administrator account in EMS server. I have only root, ipcs, ucsec accounts. I can only SSH using ipcs account and change to root. Need to reset the WEBLM admin password running in same EMS server. Appreciate help.
  10. dessertman

    Resetting WEBLM Account and Password

    Thanks for the help. How can I get the admin> prompt? I have root and ipcs accounts and only getting [ipcs@SBC03 ~]$ prompt. [ipcs@SBC03 ~]$ weblm_reset -bash: weblm_reset: command not found
  11. dessertman

    Resetting WEBLM Account and Password

    We reverted our EMS to factory settings and then tried to log in to the WEBLM server using the default admin/weblmadmin account. After few attempts we are receiving the blow message. User access is blocked. Please reset the user password to login. Seems like factory reset didn't reset the...
  12. dessertman

    Installing SBC Software on 340 Server

    We received ASP110R340 server software preinstalled. Version 8.1.1.0-26-19214 I am trying to reinstall the software but failing. Installation start to run but stuck after the below line. loop module loaded. Tried version 10.1 and 10.2. Still stop at some point. Can someone help me on...
  13. dessertman

    Authentication settings in IPO or SBC?

    We are doing IPO and SBC configuration in few days. Where should we configure Authentication (client)? In IPO or SBC or both? Authentication is done by ISP. No authentication server role in SBC. With SBC, are there 2 trunks one between IPO and SBC and other between SBC and ISP? Or just "Proxy"...
  14. dessertman

    Adding Country Prefix with +

    Thanks. I will try this.
  15. dessertman

    Adding Country Prefix with +

    I am setting up a SIP trunk on IP Office + ESBCE. Our ITSP instruction is Customer should send global format sip:+955(Area code)(7 digits of range) for all incoming and outgoing calls How can we add +955 prefix? (For out going, Incoming is their duty I believe)
  16. dessertman

    ITSP Domain Name and DNS name Resolution

    We have to setup Avaya SBCE. Thanks for the tip. We will point SIP domain to the SBCE as you suggest. Just checked, In SBCE SIP server configuration, there are settings for SIP domain and IP address. Do we have to specify SIP Domain (text format) there?
  17. dessertman

    ITSP Domain Name and DNS name Resolution

    Hi All, I have received below information from the SIP service provider to configure a SIP trunk. Username=+12345677@xx.yyy.com.zz; Password:11111111; Customer IP address= 10.10.10.10; Gateay =10.10.10.1; SIP Server IP address = 10.11.11.11; I haven't received ITSP domain name. But it seems...

Part and Inventory Search

Back
Top