Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: richa164
  • Order by date
  1. richa164

    Changing IP Address Server Edition

    Thank you
  2. richa164

    Changing IP Address Server Edition

    Hi telpeter ... Then, The Best is to re-install the SE again. ok, if I just connect the LAN1 from the SE and Expansion, Can I use the LAN2 port from SE and WAN port (LAN2) from Expansion to start the ignotiation process again, and connect these ports to the customer switch (already disconnect...
  3. richa164

    Changing IP Address Server Edition

    Hello ... its possible to change the IP Address of the IP Office Server Edition Using IPO Server Manager Mode ? The Customer need to change the IP Address of the Network and I Know its not possible to start the ignotiation process. Thanks in Advance
  4. richa164

    IP Office and Microsofit Lync Cloud

    Hello ... Any Suggestion ???!!! Thanks in Advance
  5. richa164

    IP Office and Microsofit Lync Cloud

    Hi ... We have a customer need to make integration from Avaya IP Office 8.1 to Microsoft Lync Cloud. Is this acceptable ? what’s the requirements to accomplish this ? Thanks
  6. richa164

    Avaya IPO VMPro, Analog Trunk and CLI Type

    Hi smokinjoe, do you mean after start the Impedance, no I dont try this ??? Thanks
  7. richa164

    Avaya IPO VMPro, Analog Trunk and CLI Type

    Hi All, Is there any configuration either on IPO or on VMPro I can test ??? Thanks in Advance
  8. richa164

    Avaya IPO VMPro, Analog Trunk and CLI Type

    Hello ... I also try to use Embedded Voicemail (Auto Attendant), the same problem occur . Thanks.
  9. richa164

    Avaya IPO VMPro, Analog Trunk and CLI Type

    Hi ... Is there any Idea to help me solving this problem ?? Thanks
  10. richa164

    Avaya IPO VMPro, Analog Trunk and CLI Type

    Hello Telecomboy ... As I tell previous, I test and try all the options on analog trunk, one of it is start Impedence, but the same problem still exists. Also I runing IPO Rls9 and the problem is still. Thanks.
  11. richa164

    Avaya IPO VMPro, Analog Trunk and CLI Type

    Hello ... I have IPO Rls. 8.1, with VMPro 8.1. I have 4 CO Lines Configured as Loop Start ICLID ( The CLI Type is FSKV32 (deafult) ) I have Configured a Module on VMPro to be answered by ICR. When Calls the Company Numbers, there is a busy tones returns back on all lines. I change many...
  12. richa164

    SCN and Connection Issue

    Hi ... Thanks, so its a network issue as tlpeter advice. last thing, what should I tell the IT to do to solve this problem ? Thanks and Regards.
  13. richa164

    SCN and Connection Issue

    Hello Mr. telpeter: Can you tell me more about this ? what should I do to solve this ? Because the IT Engineer tell me that the firewall between two sites is not configured and all ports is open ? Thanks and Best Regards.
  14. richa164

    SCN and Connection Issue

    Hello ... when ring from extn 104 to 201, the phone show me the name of the person that I want to calling when try to dialling (Reception) but with Unobtanable. Thanks.
  15. richa164

    SCN and Connection Issue

    Hi derfloh ... when check via SSA, the SCN line on each system is UP and the channels is Idle. Thanks
  16. richa164

    SCN and Connection Issue

    Hello ... I have the following case and I need a help to Solve it : I have two IP Office 500v2 Rls 8.1 Site A: IP Address (LAN1): 172.20.0.11 SCN line : 17, Outgoing: 2 IP Route: 0.0.0.0 / 0.0.0.0 / 172.20.0.15 / LAN1 Short Code: 2XX / Dial / . / 2 (outgoing Line ID) Site B: IP Address...
  17. richa164

    UMS and WebVoicemail

    Hi telpeter, I checked before installing VMPro. any way I will check it again. Thanks
  18. richa164

    UMS and WebVoicemail

    Hi Jamie77, ya, I check the Webvoicemail as I illustrated provious. Thanks
  19. richa164

    UMS and WebVoicemail

    Hello ... Nothing to do here ?? Regards.
  20. richa164

    UMS and WebVoicemail

    Hi ... I need a suggestion whats I can do next ?

Part and Inventory Search

Back
Top