Search results for query: *

here is my inventory list.... NAME: "2811 chassis", DESCR: "2811 chassis" PID: CISCO2811 , VID: V01 , NAME: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1", DESCR: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1" PID: VWIC2-2MFT-T1/E1 , VID: V01 , NAME...

Here is my issue. I have a cisco 2811 with the IMA bundle installed. I also have 2 dual t1 controllers as well. These all come up under my show inventory. The issue is that these interfaces are not listed under show int, nor can I list any show controller t1 or show ima interface. My IOS is...

never mind.... dumba** changed the Allied's IP a while ago, and forgot to update the default gateway of the central office's routers... oops......

Yes, the 172.16.x routers have a default gateway of the other end of the PTP line, and they can ping all the way to the LAN interface of the allied (which means the Allied has a return route statement going back, otherwise, there would be no traffic between the 2).... here is the config for the...

Just to be clear, these routers are not the gateway for the network. There is currently an Allied 415s that is doing the nat just fine. Anyone on the 192.168.1 sub can get out fine, its everyone on the 172.x subs. They can only ping to the LAN port of the Allied.

K, I am still stumped on getting out to the web.... Here is my config for the 1841. Once again, all my subs are talking now, except the 172.16.x subs can not go out to the web... CFHS2#sho run Building configuration... Current configuration : 2625 bytes ! version 12.4 service timestamps...

thanks, that works for the 192.168 sub. I also have 4 other subs that are 172.16.4, .8, .12 and .16 subs that I need to include for internet access. Right now they can ping up the router.... BTW, I took that virtual template off since its not needed....

So I am fairly new to Cisco routers (deal with Allied and Sonicwall products). Have an issue with getting an 1811 router to talk with the outside world. Outside IP: 209.218.110.68 Inside IP: 192.168.1.254 Router can talk fine to the net, but internal workstations are not. They can ping...

sorry, wrong forum....

So I am fairly new to Cisco routers (deal with Allied and Sonicwall products). Have an issue with getting an 1811 router to talk with the outside world. Outside IP: 209.218.110.68 Inside IP: 192.168.1.254 Router can talk fine to the net, but internal workstations are not. They can ping...

K, I have everyone talking with each other, just can't get out to the web now!!! Assuming its a NAT thing now....

so should the access list on the main office routers just include all IP's on all subs?

topology for internet access would be (from the remote site).. PC-Remote Router-Main Office Router-Pix-Internet. Each Main office router has 2 WICS (one for each remote site). The central office's default interface would be FE0/0, and yes, all remotes site would go through the main office for...

attached are 2 routers, one from the main office (CFHS) and one from a remote office (Patter)..... Includes running config, sh ip int and sh int...... ***Main Office*** Current configuration : 2227 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime...

I can post the SH tomorrow AM, but yes, each router at the main office has 2 WIC's in them. These are over digital PTP connects. I tried them in the lab using a t-1 crossover (know the cable is good) with the same results.... The line transfer is good, I just think it has something to do with...

almost forgot, none of the branches can go out to the web either....... I have the NAT enabled on the central office's router to include all of the subnets, and the branch routers have NAT disabled.....

Hello everyone. I have an issue with some 1841 series routers. We have a client who needs to join 4 locations with his central office. He has purchased 6 of the 1841 routers (2 of them for the central office, 4 for the remote sites). All sites will be connected via PTP circuits, as they all...