Search results for query: *

I've figured out what's the problem: by rule 105 I allowed packets to come through, but never allowed for them to return. As soon as I allowed that - everything started to work. In any case, thank you for your help. This thread is another sample of what can go wrong, when you're in hurry :)

acl105 allows ping to go through, but I don't receive respond. I've tried adding that route - it didn't make any change, since .5 is just a system on other end (ie we using switchport on soho 91). I've put my laptop with wireshark on other end, set it to 99.5 and started pinging it. i see ping...

>Can we assume that for your two internal networks you are using switches, if so, what kind? I'm connected directly to the 1811 via switchport. So far, I'm the only computer on 192.168.10.x network. As to 192.168.99.x network, there is soho 91 router, and i'm connected to one of the switch...

just to correct original diagram. here is more full diagram. cable modem (fe0) -> cisco 1811 -> (fe2) office lan 192.168.10.1/24 || \/ (fe1) another network 192.168.99.7...

!This is the running config of the router: 192.168.10.1 !---------------------------------------------------------------------------- !version 12.4 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service...

Hi, I've replaced my old flaky 831 with 1811. I'm trying to acomplish one thing, which will allow me to get rid of extra routers on the network. I'm new to Cisco, so have no idea how to do this. I've got following setup: cable modem (fe0) -> cisco 1811 -> (fe2) office lan 192.168.10.1/24...

Burt, My config is slightly different. 192.168.10.0 -> Ethernet1 Cisco831 ----> WAN (internet) 192.168.99.5 -> T1 -> rest of .99.0 network I need to make those two network accessible to 192.168.10.1. Ie connect cable coming out of T1 device (ethernet) in to one of the 3 ports of...

it's t1 point-to-point, but both ends are ethernet. ie, i see this as just very long ethernet cable.

Hi, I've run into problem, and I'm new to Cisco thing, so decided to ask you a question. I have 831 running 12.3 T9 (or something like that). I have WAN connected to Ethernet0, and my LAN (192.168.10.0/24) connected to Ethernet1. Also, I have another network, connected with point-to-point...

no. i have docs which are available at support.nortel.com. Can you let me know what is the name and/or publication number, so I could look it up? thanks

the problem is, strings I've got are not old or new format. it some kind of third format.

Hi, I've got these manuals: 553-3001-350, and 553-2631-100 and one more. I read them. I've got dump from serial port of Option 11. If I follow manual, my parser won't understand feed i'm getting. If I will follow feed - I don't know what I will end up with. Here is sample: N 095 00 T001019...

yep. it would be simple. he doesn't have access to pbx either. don't ask. it is complicated.

yes. but I need longer. at least 100-200 records. more is better, but it should be in some kind of attachement, so message forum wouldn't break file. ie add new line where it shouldn't be.

Hi, I wrote parser for Meridian, but need to test it prior to sending to the field. Does anyone can send me small dump from their Nortel Meridian system? I would appreciate this. -V