Search results for query: *

Hi Sorry for the late reply, been away on leave. first of all thanks for your replies. We are using a windows firewall, and i am relatively new to the networking side. i have tried disabling all firewalls on windows firewall and the linksys vpn rv082 and allowing all traffic through the bt...

Good afternoon We have upgraded our phone systems to the UCA 5.1 softphones. We do not have the teleworker function. We are tring to get the phone to work via VPN (greenbow client) Once connected on VPN we can ping the UCA server and ip address. On launching the phone we get the message...

Hi Phone just keeps rebooting. all the correct info in the static settings. i just keep getting packet send fail can you manually input the dhcp info?? thanks

Still no luck phone just freezes with 192.168.1.67 on the screen?

I have entered the default gateway as 192.168.1.254 as shown below. and i am recieving L2&boot download error. Ethernet adapter Network Bridge: Connection-specific DNS Suffix . : gateway.2wire.net Link-local IPv6 Address . . . . . : fe80::616b:e2ac:ffc9:bb25%35 IPv4 Address. . . . ...

Please see my ipconfig all and see if hyou can help. thanks Windows IP Configuration Host Name . . . . . . . . . . . . : Stuart-HP Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . ...

With the above settings i am now getting TFTperr packet send fail

I have held the superkey and naviagted to change static settings. Phone Ip address - 192.168.1.67 (IPv4 add.) Default Gateway IP - 10.0.0.50 (mitel 3300) Subnet mask - 255.255.255.0 ( ithink this is correct, i dont know where to look for this) ICP IP Address - 10.0.0.50 (mitel 3300) TFTP SVR IP...

Hi i am now getting the IP showing on the phone, but i am getting RTOS DHCP timeout?? Guessing it is not seeing the servers?

I forgot to mention. we have the wireless adapter and lan adapter bridged on the laptob the phone is connected to. As we have them bridged we are getting the local ip address displaying on the phone.

We have recently set up a secure ipsec client to gateway connection from greenbow to a Linksys RV082 on a wireless network. We can ping and access the Mitel 3300 ICP system from the remote computers via the VPN connection. The problem is that we cannot configure the mitel 5224 ip phone correctly...