Search results for query: *

telcodog - Thanks for your input but I am attempting to help a friend/client with their BCM50 in hopes to keep their costs down. This company is just starting up after a fire destroyed most of their office. I did finally figure out that this system was configured for a PRI line and not...

Lines 61-64 appear to be in Pool A. All others are in Pool:BlocB. Under Dialing Plan>Line Pools, Pool A has a blank access code and I can not change it to 9. Under Dialing Plan>General the External code is set to None with 6,7 and 8 as options in the drop down. All sets seem to have Pool A set...

Okay, so I have (4) known good lines punched down on the first 4 pairs(61 thru 64) of the block. I still I do not have dialtone on what appears to be a functioning extension on a T7208. I get the message "No free lines" when I hit 9 to get a line. What do I check next? As in what menu under...

bluemr2- Are the extensions in reverse like on the main unit? Does it start with 249 and go down to 233? On the Nitsuko system it does not matter which extension you punch the phones down on. Do the BCM phones work the same way or do you have to punch them down on the assigned extension?

The FIOS lines are definitely working on a handset. Am I correct in putting them on the first 4 pairs on the 110 block? Can I check to see if the system sees the lines properly through BCM Manager? Do I need to adjust settings for the FIOS signal? I found this on another post which seems to...

I forgot to mention this was delivered to me at the office still on the mounting board ducted taped together in a total mess. So there could have possibly been some damage done to the system.

First of check the line with and analog handset to confirm they are working. I am able to make and receive calls from all lines. Have you got keycodes to enable the internal trunks ? All keycodes had already been entered when it was setup by Verizon in 2007. It was originally setup on a T1 but...

I am trying to get a BCM50 working with Verizon FIOS phone service. I am punching the lines down on the first 4 pairs as indicated by the manual but the phones are giving me no lines available message. Could the fact that the system has (2) additional modules change the wiring for the RJ-21? Do...