Search results for query: *

I'll keep trying other trunks, as a temp fix, I just programmed another port for the phone. I'll try more trunks the next time I'm out there. Thanks guys

It's possible, but I've also loaded the translations into another processor in surrogate mode and the same thing is happening.

tdaugirdas yes, to delete the empty pool button I need to add a trunk to the pool, then unassign the line from line assignments. I've run into this before, but I've always been able to assign a line to the pool. This time the switch won't let me. I've tried all of the unused analog trunk...

I didn't try 841 specifically, but I did try a few in the 850s. Should I try 841? The Original trunks in 896 were the 23 pri trunks. Owner wanted seperate caller id to be outpulsed so I made changes and uploaded translations after hours. Which trunk info report did you want to see? There are...

70 pool is used for 911 calls only, this is an analog copper trunk for emergency use, I've got 23 pri trunks in pools 890 thru 894 for different caller id on outbound calls. I am using dial "9" ARS for outbound calls. Pool 899 has a private trunk in it. I'm using ARS and restriction levels to...

here is the gen trunk info.

The switch has pri service. I'm not sure how this could help but the installed modules are as follows: 1-408MLX 2-800CLID 3-008MLX 4-008MLX 5-016RNG GEN 6-012RNG GEN 7-012RNG GEN 8-408GS/LS ID 9-016T&R 10-016MLX 11-024TDL 12-024TDL 13-MERLIN MESSAGING 14-100DCD I'm trying to get my...

I'll get general trunk info posted today, I've looked at it and didn't see anything out of the ordinary. I know it is a valid pool because it is still assigned to several extensions even though it is empty. It is 896.

I've got a Magix that I recently did changes to the outbound pools and wasn't thinking when I emptied a pool of it's trunks. I had this pool assigned to several analog stations the customer was using for faxes. The pool in question is still assigned to the single line extensions, which wasn't...