Search results for query: *

With the good old Nortels I could add the ATA to a DS port and get analog dial tone. I have a site that needs a distant analog line for a remote site. Does Avaya or another provider have an ATA that I can attach to a DS line? The cabinet is full and I am trying to avoid buying a 16 port...

Thank you both for your suggestions. Several people answer for reception and they are not paying attention to the button ringing so I tried this work around. I had a spare analog PHONE port available so I assigned the virtual user ext number to that port. I then set up Bridged Appearance on...

HI. hibroth, I looked for the MADN but could not find that feature. This SW is 9.1 gkittelson, I tried the GROUP set you you suggest but when the call comes in it rings and flashes on bot the Appearance button and the GROUP button. Is there a way to just have it ring and flash on the button...

What is the best way to set up a DID number that is virtual and will not have a handset but will ring at the reception desk and allow the reception to answer with that persons answer phrase and also to place calls sending out that buttons DID number I set up a user and then assigned assigned a...

I have found that when this happens I reboot or power cycle to correct the problem. When I record any auto attendant greeting I always pause about 3-5 seconds because it tends to not start recording for a few seconds after the beep. Also when using analog lines there is a delay required...

Thank you. Yes there is their original router that is providing the DHCP. This then would explain why their network did go down. I do need to provide voice mail to email so would it be best to set up the 9611s on LAN 2 using IPOs DHCP at 192.168.43.1 and then set up the LAN 1 as 192.168.1.XX...

If I use the LAN 1 to a POE for my 9611gs and then set LAN 1 to a IP address on the customers network lets say customers network is 192.158.1.1 my Route is 192.168.1.1 and the IPO is 192.168.1.51 and the IPO is set for DHCP will this cause a DHCP conflict or interfere with the clients other...

I use relay.appriver.com or 8.31.233.167 The EMAIL FROM ADDRESS is a problem sometimes. It wont accept it so I just use one with xxxxx@COX.NET and it seems to accept anything from COX.NET

IamaSherpa, anyway of boosting this signal?

Yes I agree. Do you have a suggestion for boosting the DS Signal to the Expansion Module? Thank you

I am m playing around with being able to boot the DS signal from an Avaya IP office 500v2 for an External DS30 Expansion Module 2 Mbits connection (64k x 32). Currently it can only be about 2 meters away form the control unit using a shielded RJ45 cable I would assume that a POE or an ethernet...

I'll play around with it and let everyone know. I would assume that an ethernet signal booster will not work for this type of signal?

Thank you all. I play around with low voltage devices from time to time and I am curious from a technical standpoint does anyone know what prevents a DS signal from being boosted further to a remote DS Expansion Module?

We have a new building that has been added right next door and the phone closet where the IP Office is located is probably about 200 feet away. We use 9508 digital sets. Is it possible to extend the signal to a Digital Expansion 30 module so that it will still connect to the control unit? I...

Installing Nortel's for about 20 years and it seems that they had pretty much everything figures out for a simple install. 66 Blocks and then the rest went into the wall mounted cabinsts. I know the two are different but it seems each time I install an IPO every installs requires me to come up...

On the old Nortel when a internal user called someone and that person was on a call or had their phone on D.N.D. the callers display after 1 ring would say "On Another Call" or "Do Not Disturb". Is this possible with IP Office 9.0 and or 9.1? Thank you

I am trying to change the 9611 screen saver time out but I can't locate the 46xxx settings file in my embedded file manager 9.1.

I don't have this issue with PRI voice mail because it drops the call instantly. With Embedded and VMP using analog lines the voice mailbox is recording hang up the mailbox is calls and dead air calls and the MB is full of these and they user gets upset. . Is there a minimum record length setting?

Also have plenty of Endpoints available

I have the Power User ticked ( they have 53 available Power User Licenses ) I ticked the Gate Keeper on VOIP for the LAN I have the Public IP address entered into the 9621 entered as the Call Server and the HTTP I am still getting the Enter Ext screen and then after I enter the password it...