Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. mdnewey

    Lease Cost Route Busy

    This is a long shot but when all lines on the system are busy and anybody dialling 9 for outside line gets 'Lease Cost Routing Busy' on the display on their phones, does the MD110 record anywhere how many calls fail to obtain line?
  2. mdnewey

    Config Of DASS Trunks

    Hi, I have a DASS2 circuit that was used purely for outgoing calls and now want to route incoming calls over it and before I get BT to present my DDI range from my other DASS2 circuit over this one as well, I wanted to checked that channels are configured for bothway working and the number of...
  3. mdnewey

    Lease Cost Routing Help On MD110

    Here are the details for LCDDP:TAB=DNT1, LCDDP:TAB=DNT2, LCDDP:TAB=FDT; and RODDP:DEST=ALL. I don't have NADAP and LCDDP:TAB=ENT to hand at moment and don't currently have access to the PBX tp obtain. Hope this help anyway! <RODDP:DEST=ALL; EXTERNAL DESTINATION ROUTE DATA DEST DRN ROU CHO CUST...
  4. mdnewey

    Lease Cost Routing Help On MD110

    Thanks for your help. I have now truncated digits in the roddi using trc/srt but still get vacant number when I try and call the number. The commands I am now entering are: RODDI:DEST=84,ROU=2,TRC=3,SRT=3,PRE=1840; RODDI:DEST=84,ROU=1,CHO=1,TRC=3,SRT=3,PRE=1840 Any ideas why this still...
  5. mdnewey

    Lease Cost Routing Help On MD110

    Thanks for your help. The truncating of digits makes sense,however I have tried to enter 1840 as external destination in NADAP by entering the command NANSI:NUMTYP=ED.NUMSE=1840 but I get message back from the system saying not accepted number series already assigned. Any ideas on how I can...
  6. mdnewey

    Lease Cost Routing Help On MD110

    I am quite new to the MD110 and am trying to program the LCR on the MD110 to add a prefix of 1840 on outgoing calls to route them to perspecfic carrier. For example to add the prefix code for international calls I have entered the following commands: NANSI:NUMTYP=ED,NUMSE=84...

Part and Inventory Search

Back
Top