Search results for query: *

When connecting Z-Modem at 38000 (o) settings with 16550 uuart and good connection, downloading file tranfers are limited to 9KB while uploads are not impaired. No indications of other problems. Any suggestions. W.P.Smith

Just to post the final resolution FYI. the Original setup of the server had COMB at IRQ3 2E8 (this is the serial port with the modem); COMA at IRQ4 3F8 and the default for COMC at IRQ3 2E9. Changes to addresses on COMCdisabled or not didn't fix anything; however when COMB was changed to 2F8...

HP Netserver /SCO supprt asked me to follow instructions from SCO TA109287 (set up Serial Console) to try t orebuild serial port gettys. That TA had the mkdev done in Single-user mode!!! I have not seen any references to using mkdev or modem manager while in singl-user mode.. I do know that...

Apeasepc, Thanks for replying. I had a USRobotic Sportster 33.6 (working for 4 years as set for dial in), updated BIOS on HP LH3 and had "fixed discrepencies" in Software Manger, could not dial in afterward but didn't discover for couple of weeks. No changes had been made directly to...

inittab has both. I just finished the Tony Lawrence unixart dial-in only instruction including the direct line in lib/uucp and chown. I get connected to tty2a then, but the screen/console starts responding extremely sluggishly (eg 5 minutes for the ~. command to respond) and I still get no...

shuldn't I see the tty2a (not just tty2A) on the com port? On com1, tty1a and tty1A exist. on com2 only tty2A exists. If Ienable tty2a, I get a normal response, but it doesn't show up in the ports config. W.P.Smith

Ed, Thanks. I do not get an "ok" at cu commands and the keyboard is not letting me type an ycommands after connect, except ~. . I donnot understand the serial port turnaround. I have looked a tony Lawrence's FAQ's and I am trying various settings on Serial port and Modem now. I...

3 different modems (USRobotic Sportster 56K, 33K, and Hayes Optima 28.8K) set to Auto answer in SCO OpenServer 5.0.5 and installed and re-installed on tty2A with 2a disabled and AA light on, will not answer when dialed in. AA light begins to flash on and off during rings. Settings have not...

Any suggestions or recommendations on 32MB or 64MB 2x AGP video cards to replace existing on-board video (ATI Rage128/8MB)) in Pavillion 8495 with (OEM) Asus P2b-VE MOBO (jumpered). I have concerns about the power supply already loaded down with DVD, CDWriter,usb, etc and have posted separately...

Has anyone successfully upgraded the power supply (OEM Delta 145Watt) in a Pavillion 8495 (MOBO: OEM Asus P2b-VE / Condor bios)? The proprietary nature of these units may not allow standard ATX or Mini-ATX psu's and I would like to at least up the power to 200-300Watts if possible. HP only...

Try to internet search old SCO support Technical Advisory as "T/A # 105327" concerning HPNP and multi;le port assignments. Also, search HP JetDirect support for the 500X. Pay particular attention to any references about the first port. We have it working. Good luck.

we are about to implement Server Protect 5 on our NT Terminal Server sp6 AND OfficeScan For SBS 4.5 on our SBS server. We also run BENT 7.3 on both servers and would like to follow your discussions, but as yet, cannot contribute, but will if (big maybe) they arise. W P Smith