Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. melissamay1

    How to disable SCSI CD, and enable IDE CD during install?

    Hi everybody! Sometimes just asking the question can give you the answer! After I made the last post, I got to thinking. Since the IDE is controlled by the wd driver, maybe this would work: defbootstr link=ad320 Srom=wd(0,0,0,0) Sdsk=ad320(0,0,0,0) My thinking was that using the Srom=...
  2. melissamay1

    How to disable SCSI CD, and enable IDE CD during install?

    Hi All: I have: SCO Openserver Host 5.0.4, and Adaptec 39320 SCSI adapter with a hard drive and tape drive connected. I also have an IDE CD-ROM drive. During install, the hwconfig screen shows the cd-rom as scsi id=5, but there is no scsi cd. It does not list the IDE CD, though it does...
  3. melissamay1

    Help with Adaptec 39320-D and OpenServer 5.0.4 driver?

    Hi All: A follow-up to my original post: I downloaded the 5.0.7 Adaptec ad320 driver from ftp://ftp.sco.com/pub/openserver5/drivers/OSR507/btld/ad320, created a floppy using the instructions at ftp://ftp.sco.com/pub/openserver5/drivers/OSR507/btld/ad320/ad320.readme, and used the driver during...
  4. melissamay1

    Help with Adaptec 39320-D and OpenServer 5.0.4 driver?

    Thanks PH. That driver isfor5.0.6and 5.0.7. I'm going to tryit, though. I'llletyou know if it works. Thanks!
  5. melissamay1

    Help with PANIC error message

    Hi there: Too bad for the Panics, but good that it's a new install... I've had similar problems on new installs. For me it's usually been some bad drive-related thing, like a bad cable or bad drive. I'd test the drive subsystem (drives and controller) as much as possible. Swap drives out, if...
  6. melissamay1

    Help with Adaptec 39320-D and OpenServer 5.0.4 driver?

    Hmmm..."all" the patches! Who knows how many there were... I suppose I could just try it and see, but I'm wondering if there'd be a problem far more subtle than "It doesn't work."... I wonder how many patches there have been since 5.0.4 was released... :) Thanks for you help.
  7. melissamay1

    Help with Adaptec 39320-D and OpenServer 5.0.4 driver?

    Oh, sorry... one more thing. I was able to get tino ftp.sco.com, but there weren't any adaptec drivers there. I expected there would, since sco supports adaptec with supplied drivers... Thanks!
  8. melissamay1

    Help with Adaptec 39320-D and OpenServer 5.0.4 driver?

    Hi folks. Hope somebody can help. I'm trying to install an Adaptec SCSI card, 39320D-R into SCO OpenServer 5.0.4. The only drivers on the Adaptec site are for 5.0.7, and I don't know if that should work. I've never had to, or tried to, use drivers on previous versions. The SCO and Caldera...
  9. melissamay1

    Hot to ID a tape on BE 8.5.4108 for Netware

    Hi all! I'm taking over administration of a Netware server, using Backup Exec version 8.5.4108 to manage the backups onto DDS4 DAT tapes. The previous administrators have labeled tapes with only "Monday", "Tuesday", etc., but with no dates. Although they rotate the same...

Part and Inventory Search

Back
Top