Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Beecky

    attachments above 10Mb fails

    ...it shows me unlimited. The result of the Get-SendConnector is This is the result from a Get-SendConnector AddressSpaces : {smtp:*;1} AuthenticationCredential : Comment : ConnectedDomains : {} ConnectionInactivityTimeOut : 00:10:00...
  2. Beecky

    VPN with PIX and Watchguard X-Peak

    Hi Yes it is possible. Allthough it might be hard to configure the cisco pix. Regard Beecky
  3. Beecky

    attachments above 10Mb fails

    ...show also that the maximum messagesize is Unlimited. This is the result from a Get-SendConnector AddressSpaces : {smtp:*;1} AuthenticationCredential : Comment : ConnectedDomains : {} ConnectionInactivityTimeOut : 00:10:00...
  4. Beecky

    attachments above 10Mb fails

    Hi folks, We encounter some issues when sending emails above 10Mb. When we try to send these from our outlook client, we get the message "... reported error (0x80040610):'The message being sent exceeds the message size established for this user' I allready changed the Receiveconnector from...
  5. Beecky

    Holiday management

    Thanks for the reply ... Any other advice is welcome, I will check with our ASP programmer what he can do.
  6. Beecky

    Holiday management

    Mark, Our intention goes further than that. The centralized calender is only a part. Currently we go a lot further. Every employe can see how many vacation days are available, how many days he used allready. Also the different types of official holidays must be in there like, holiday, extra...
  7. Beecky

    Holiday management

    Hi, I would like to know if anybody has expirience with holiday management on an exchange server. We would like to centralize all the holiday requests for our employees. Currently we use a tool for this in lotus notes. But We are thinking to migrate to exchange, but off course we need migrate...
  8. Beecky

    VPN between Netscreen 5XT and Watchguard edge X10e

    John, It's not possible to take captures on the inside because the edge has an inbound switch. Placing a hum on the external could be usefull, allthoug the traffic that you see there is encrypted so that wouldn't make sence either. rgds Beecky
  9. Beecky

    VPN between Netscreen 5XT and Watchguard edge X10e

    John, No clear signs in the logging, and in the packet captures I don't see traffic in the tunnel. We will replace the netscreen with another WG. rgds Beecky
  10. Beecky

    VPN between Netscreen 5XT and Watchguard edge X10e

    No luck with the captures, there is no traffic comming out of the tunnel. I will setup a syslog server and enable the hidden IKE trace in the watchguard. I keep you posted Beecky
  11. Beecky

    VPN between Netscreen 5XT and Watchguard edge X10e

    Hi John, Good idea. I always ask my customers to take ethereal captures, and now I forgot it for myself ...(stupid) I will try to take some captures, but I can oly take them on the trusted site. I'll keep you posted rgds Beecky
  12. Beecky

    VPN between Netscreen 5XT and Watchguard edge X10e

    John, 192.168.2.1 is the internal IP of the internet router. This router does NAT. On the LAN interface of the router I have 192.168.2.1 and the untrust IP of the NS is 192.168.2.2. There is not very mug to debug on the WG site, because of the poor logging. NAT shouldn't be the issue either...
  13. Beecky

    VPN between Netscreen 5XT and Watchguard edge X10e

    ****** 28588.0: <Trust/trust> packet received [60]****** ipid = 21879(5577), @000bb84e packet passed sanity check. trust:192.168.1.2/64307->192.168.119.1/512,1(8/0)<Root> chose interface trust as incoming nat if. search route to (192.168.1.2->192.168.119.1) in vr trust-vr for...
  14. Beecky

    VPN between Netscreen 5XT and Watchguard edge X10e

    ...IP-Prefix Interface Gateway P Pref Mtr Vsys -------------------------------------------------------------------------------- * 4 0.0.0.0/0 untrust 192.168.2.1 C 0 1 Root * 2 192.168.2.0/24 untrust 0.0.0.0 C 0...
  15. Beecky

    VPN between Netscreen 5XT and Watchguard edge X10e

    ...above the normal policy The service is any and the vpn tunnel is VPN_to_Arlon The proxy id's are filled in correctly. Somehow I have my doubts on the static route that we have added previously. * 192.168.119.0/24 192.168.2.1 untrust S 1 Root I don't think that we need this route. rgds...
  16. Beecky

    VPN between Netscreen 5XT and Watchguard edge X10e

    ...IP-Prefix Interface Gateway P Pref Mtr Vsys -------------------------------------------------------------------------------- * 4 0.0.0.0/0 untrust 192.168.2.1 C 0 1 Root * 2 192.168.2.0/24 untrust 0.0.0.0 C 0...
  17. Beecky

    VPN between Netscreen 5XT and Watchguard edge X10e

    ...IP-Prefix Interface Gateway P Pref Mtr Vsys -------------------------------------------------------------------------------- * 4 0.0.0.0/0 untrust 192.168.2.1 C 0 1 Root * 2 192.168.2.0/24 untrust 0.0.0.0 C 0...
  18. Beecky

    VPN between Netscreen 5XT and Watchguard edge X10e

    Hi Jonh, ns5xp-> get route ip 192.168.119.1 Destination Routes for 192.168.119.1 --------------------- trust-vr : => 0.0.0.0/0 (id=4) via 192.168.2.1 (vr: trust-vr) Interface untrust , metric 1 Maybe the tunnel interface is the problem. I thought tunnel interfaces...
  19. Beecky

    VPN between Netscreen 5XT and Watchguard edge X10e

    John, The tunnel are up. The first one is the Branch office, the other is an Mobile User ns5xp-> get sa total configured sa: 2 HEX ID Gateway Port Algorithm SPI Life:sec kb Sta PID vsys 00000005< 84.194.173.119 500 esp:3des/md5 55cce06f 3580 unlim A/U 29 0...
  20. Beecky

    VPN between Netscreen 5XT and Watchguard edge X10e

    John, I don't have access to a PC behind the netscreen. I can start a ping from behind the netscreen, is that also ok ? Regards Beecky

Part and Inventory Search

Back
Top