Hi All,
I've setup remote VPN access with RADIUS auth. on my cisco ASA 5505 box. I can connect/authenticate OK but then i cannot access any internal resources and I cannot figure out why.
Config below:
hostname companyUK-gw
domain-name company.inc
enable password password encrypted
names
name...
All,
i wonder if any of you can help. Our phone system is old Avaya Index 400 with approx 50 extensions and 50 DDIs.
over the weekend due to power cut something bad happened to the config and now all calls are coming through to the main reception number.
my questions are:
1. how do I list...
no I cannot ping, the cable and ports are OK, it works fine with:
router1:
interface serial 0
ip address 10.1.1.1 255.255.255.0
clock rate 56000
no shut
router 2:
interface serial 1
ip address 10.1.1.2 255.255.255.0
no shut
the above works fine, I am able to ping
it just does not want to work...
here it is:
two routers connected via serial cable,
router 1 config:
Building configuration...
Current configuration:
!
version 11.2
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname r1
!
!
!
interface Ethernet0
no ip address
shutdown
...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.