Search results for query: *

Thanks for the help guys. I got this worked out. There was an issue with the WRV200 at the main office.

I have a VPN set up between 2 Linksys WRV200 Routers. Router A is on DSL, Router B is on Time Warner Cable access. Both routers show the tunnel connected, however I cant ping anything on the other side, including the router. Time warner says that their little Ambit Modem isnt blocking any...

Just as an added bit of information, when an internal autodial is pressed, it rings at the main office and shows an incoming call from this IP extension. Neither party can hear.. Thanks

Ok. I forwarded all the ports you mentioned to the BCM. I still have the same problem. The phone finds the BCM, pulls back the date and time, Internal Autodial buttons configure properly... but I cant grab a dial tone or hear it ringing when I press an Ad. Any other ideas?

Great. I'll start there and let you know. Thanks for the help.

Ok... great. So I just need to forward all those ports to the BCM?

Got a little issue here. I have several IP2004 phones in remote locations all connecting to my BCM50 through VPNs, but in one location, a VPN is not possible so I actually entered my public IP at the main office into the IP2004 and forwarded port 7000 to the BCM. The phone (in another state)...