Search results for query: *

I have been having problems with DSL going out every weekend (wish I could) finally last wekend it went out and I called the ISP who checked signal at the protector which was fine inside still sync no surf he installed his modem sync no surf checked at the jack with tester good signal his modem...

Does Mitel offer a wireless headset for thier console SC1000? if not would an outside vendors work? Thanks BL

Thank you I thought they were plug and play I looked in the e-docs but must have over looked this Thanks Again BL

I had a PRI card die and sent for a replacement and had it installed and everything seems to work ok now i'm getting calls that 800 numbers sometimes dont go thru my tech on site worked with AT&T and they monitored the @ PRI circuits and saw 8 digits coming from 1 PRI and 11 from the other the...

I have F9600 all around the USA I use Robotics modems not Critical I's. take the C/I out and replace it with a extenal modem that should solve your problem. The sites that I have Mitel SX2000 we have C/I but are going to take them out and replace with Sportsters

Go to www.taa.com then go to downloads there are all the PDF's on all Amanda's products

Did you try reloading the T1 card

TMG Thanks I've looked at that a thousand times and the problem was the COS for the VM ports they had CFW activated so it was just going in a big loop Thanks again BL

Big Lucy has still another problem. a SX200EL with MEM use to work fine then it quit forwading to the mailbox (hotel/motel package). Calls come in DID to the A/A are transfer to said ext only to go back to the A/A, if you dial the DID extension number same same. All the forwarding is correct I...

Thanks Guys BL knows she can always depend on you xoxoxo BL

Big Lucy has been requested to activate CID on a SX200 that has PRI. Is this done in the COS? As always thanks in advance BL

Big Lucy needs to remotely assign an extension that when you call it it will call forward to an external number which commands would BL use As always thanks in advance for your help BL

Increasing the timer on 118 did the trick thanks

That was the first thing I did before I submited this post it didn't work and I tought I was missing something. Also I've created a MLAA tree now they want a RAD to play a msg looks like that should be easy enough I'll be using Express Manager

It's the sub front desk set

A/A answers and caller press' "0" for operator, there are 3 rings before going to VM they would like more time than 3 rings to answer before going to VM perferabllly 6 rings

Big Lucy has a customer that would like the rings from 3 to 6 when the A/A transfers to to "o" is this in the consoles COS? Thanks BL

So the RSD name is in vol format rsd?

I got it thanks I went by a number of times

I've been thru the system options form and do not see the old name nor where to put a name