Search results for query: *

Sorry Diginet propietary software for DVR's

I have 2 digital video recorders that i am going to hook up to a LAN. Both allow admin and viewing from the inside the LAN by hitting the respective addresses. However, I have a conflict when i try and look at them from outside. My router is using port 80 and so is the software on both...

Yes I have Approx. 16 Etr bewtween the 2 016 ETR boards with 3 ananlog extensions on them. 1 t/r on one and 2 t/r on the second.

I HAVE A MAGIX 3.0 WITH 1-800 ICLID, 1-412TDL, 2-016ETR, AND A MER MESS 4 PORT. EVRY 2-3 DAYS SYSTEM LOCKS UP NO IN/OUT CALLS. NO SA LIGHTS. ALSO GRP PAGE 799 DOESN'T WORK. I HAVE 19 ETRS CONNECTED 3 ARE T/R. IF I UNPLUG 3 ETR'S ITS FINE, UNKNOWN IF IT WILL LOCK UP YET. AS PER VAYA I HAVE...

I have an older merling legend system (4 years old). I have added an expansion cabinet with (1) 8 line module. Ever since, customer dials 9, sometimes it doesn't register. Mw lights don't turn off and calls bypass direct extension transfer and go to operator. I have done touch tone rec...

Yes, I have checked my TTR's the work about 60% of the time(18 TTr's). Avaya says I need to upgrade from r7 v9 to r7 v14.2. Might/should help. But yes to the ? of do they here digit 9 dialed. I can hit it several times and must hang up and try again.

Mer leg. r7- For business A, when dialing 9, intermittently I will get intercom tone instead of dial tone. Must hang up and try again a few times. I should have plenty of TTR's. All seemed to start after adding another business B and prog. them to dial 6 to access pool 895. Any ideas?

1.Can anyone tell me if MLS-12d's will work on a Merlin Legend System and with what limitations if any on an ETR Board? 2. Can someone verify that there is no way to do contact closure on a legend system without an aux. box? Thanks.

Touchtone TOmmy says that you can modem into Partner Messaging Systems. How do you do it both on site and remotely?

Can you use call recording on Merlin Messaging? Will it advertise it is being recorded?

Why do I get the message "invalid 44xx dlc" on my 4412d+ phone display when I am plugged into a merlin Magix R2.2 V7.2 first port? Do i need a different phone to be the operator?

How do I do an initial reset before programming on a Merlin MAgix Proc. cke5?

ANYONE HAVE ANY IDEAS HOW I CAN ADD AN LED TO THE MICROPHONE OF A T-TALK HEADSET? MY CUSTOMER USES THIS CONSTANTLY FOR 10 HOURS A DAY AND PEOPLE CAN'T TELL WHEN HE'S ON THE LINE. BESIDES PUTTING A SIGN AROUND HIS NECK ANOYONE ELSE HAVE A SOLUTION?

IS THE PAGE PORT ON A PARTNER PLUS 3.1 A TWO WAY PORT AND WOULD IT ACCOMODATE A TALK BACK LOUDSPEAKER?

Thanks pjolly, thats what I thought but have encountered tropubles doing this but I will attempt again. This is only a forward upgrade right? And i can't take a translation from a 3.0 and upgrade it to a 4.0 or a 5.0 correct? I don't belive that is possible.

I have a reoccuring problem on a Definity where T1 Provider keeps dropping circuit. If I bust out a board "busyout board 01a09" then Realease it, "release board 01a09" is the board back in service or is there another step?

I am having problems understanding how to upgrade Parnetr ACS 3.0's and higher. Can someone explain how to upgrade ACS 3.0 to 4.0 and ACS 4.0 to 5.0?