Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. LonngJohn

    IPO Shows as Greyed Out in Open Configuration Screen, but can Connect

    Thanks. As a follow up, what is the best practice for maintaining files to recreate different versions of the system on SD cards? When I tried to install multiple versions of the Manager and specified a different installation path (e.g. added "8.0", "9.0") for each it seemed to get confused...
  2. LonngJohn

    IPO Shows as Greyed Out in Open Configuration Screen, but can Connect

    Hi guys, I have an IPO 500v2, where I recreated the SD card using Manager 9.0.11.0/1003. All went successfully and it found my Essential license on my SD card as "Valid" and gives me the Standard Mode interface. But when I try to connect to it in Open Configuration from that same Manager...
  3. LonngJohn

    Adding Trunk Lines Later to Partner ACS 308 Rev 6.0.B

    Awesome. Thanks a lot for your expertise.
  4. LonngJohn

    Adding Trunk Lines Later to Partner ACS 308 Rev 6.0.B

    Ok, thanks. I'll try it. As far as you know, I should just note the settings for #301 and #302 Auto Line Sel and Line Ringing and then reproduce them afterwards, right?
  5. LonngJohn

    Adding Trunk Lines Later to Partner ACS 308 Rev 6.0.B

    Thanks for your response. When I try to change the line assignment on L03 (or even on L01 or L02) I get a beep and it refuses to come off of "2 Not Assigned". I will add that I am using Hybrid mode. Line Access Mode on the extension in question is set to "1 Pool" since I want the extension to...
  6. LonngJohn

    Adding Trunk Lines Later to Partner ACS 308 Rev 6.0.B

    Hi, I originally started with two lines, and had entered in #104=2. The manual warns against using #104 later when adding lines. I have now added a third line, and I just cannot figure out how to get the third line button (third from left in row above Intercom buttons) to respond and behave...

Part and Inventory Search

Back
Top