Search results for query: *

Thanks for the answer Moriendi. I don't really know what I was doing wrong before, but now everything seems to work as I expected. These different names sometimes drive me crazy. The same option may be called differently in other commands. It is difficult to get used to it. Anyway, what I...

When CHANGE-DIAGS:COMP=CP2,S05=ON; I got this F4066 M8 N0072 NO ACT BPA CP ADVISORY 24-03-01 11:33:56 ALARM CLASS:CENTRAL:023 CC:00566 EC:00506 UA:BAF0:C80F SP:4B84:1920 BP:193A LD:01-01-001-000 FORMAT:45 MESSAGE-ID: 00063...

Thanks for the answer Moriendi. But I don't know what I'm doing wrong, only this command works for me. CHANGE-KNMAT:NPI=UNKNOWN,LEVEL=0,ONNO=1,DNNOL=ROW,CONN=A,MODCON=OUT&TRANSH&TRANSI,NUMEXT=91; When I run this command...

Thanks for the answer Moriendi. Could you please confirm, if I got it correct. So KNMAT takes a DNNO from RICHT/LDAT not vice versa. Like I first do all of the trunk and destination stuff: ADD-TDCSU... ADD-RICHT:MODE=CD,LRTE=50,CD=A50,CPS=0,SVC=ALL,TGRP1=99,DESTNO=50,DNNO=50,PDNNO=50...

Thanks for the answer Moriendi. So far only this single command did exactly what I need. But this command works for all outgoing calls. CHANGE-KNMAT:NPI=UNKNOWN,LEVEL=0,ONNO=1,DNNOL=ROW,CONN=A,MODCON=ALL,NUMEXT=91; I tried these commands, but they didn't work as I expected...

Hi guys. I have an OpenScape 4000 v10 which is connected via SIP trunk to Yeastar. Trunk works without problems. OpenScape side - 4XXX Yeastar side - 1XXX I need to add the 210 prefix to 4XXX when calling any Yeastar subscriber. The only records I have are...

Hi. HiPath Manager -> Settings -> Least cost routing LCR flag should be checked - "Activate LCR" Check if the Dial Plan properly configured Least cost routing -> Dial plan

Hi. Check this (attached) might be useful. https://files.engineering.com/getfile.aspx?folder=93864db2-0fda-4d00-9417-7efa61e01e79&file=Screenshot_2023-09-20_175338.jpg

My bad. Better to check it first of course.

Do you have any SIP subscriber registered and working in your system? You can check if this CHANGE-ZAND:TYPE=OPTLOAD; is set in your system.

Hi. Most likely you need updated version of the Manager. If it's not version issue then try these: (1) Try to use Admin LAN Port: 192.168.2.1 (ip address of the Admin LAN Port) (2) Reset motherboard manually (if it's acceptable) and try to connect again...

You are very welcome.

Hi. Check these: Settings -> Classes of service -> Station (Day and Night) Settings -> Classes of service -> Group Assignment -> CON Matrix Settings -> Least cost routing -> Dial plan I attached offline.kds. This is just a rough example and most likely it needs some...

I think this is some software incompatibility. I've never used Windows 10 or newer for CLA before. I usually use Windows 7. Try to use windows compatibility mode. I had a crash issue when opening the "Licensing" section, back then I updated the Manager and issue gone.

Usually it works just fine. Did you start browser with CLA web page (desktop icon should appear after CLA installation)? What is HiPath firmware version and OS version ?

Hi. Max number of trunk channels (ITSP, SIP-Q, Native SIP, TDM trunks, MEB) for OSBiz X8 = 250

Hi. Time reset occurs after station restarts or by itself? What is the software version?

Can you show the errors above and beneath F6524 ?

Hi. I don't have it in English. F6524 SM-AM MAINTENANCE Art: Servicerelevant (mehrere Formate relevant) Kurztext: Wartungshinweis, ausgelöst durch den Alarm CENTRAL:029 MAINTENANCE NOTE. Ursache: Diese Meldung enthält in der Regel einen transparenten Text, der entweder selbsterklärend ist...

Olabilir. checking cards... genellikle bağlantı noktası hızının yanlış seçildiğini gösterir. ip ile bağlandığında, yanlış ip adresi olabilir.