Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Bandwidth limiting on Cisco WS-C2924M-XL-EN?
Hi guys, I have recently acquired a Cisco WS-C2924-XL-EN switch for use as an experimental switch and I've come up with a question which I can not find an answer to for the MODULE version of the C2924. So: Is it possible to limit bandwidth on a per-port basis on the Cisco WS-C2924M-XL-EN apart... -
Dell Poweredge 2650 Redundant Power Supply question
Hi guys, A quick question regarding the redundant power supplies on the Poweredge 2650's - Do they act as UPS's (Keep the server going if the power goes out) if the power goes out? Cheers for your replies -
Weird problem on a C2924M-XL with a WS-X2931-XL and WS-G5482 GBIC.
I managed to fix it on Monday. It appeared to be the old VLAN configuration from the previous owner. I also updated the firmware. Thanks for your help, Vince. -
Weird problem on a C2924M-XL with a WS-X2931-XL and WS-G5482 GBIC.
Sorry, I should have been more thoughrough. We brought the Module in Refurbished condition so it didn't come with a manual and we brought the switch from an IT recycling company (They said it was working) so the switch didn't come with a manual. Would a reset do anything to resolve this... -
Weird problem on a C2924M-XL with a WS-X2931-XL and WS-G5482 GBIC.
Hi Vince, thanks for your reply. We brought the Module off of a website in the 'Refurbished' condition. We have tryed to restart the switch with the module and GBIC installed. What else can you suggest we do? Again, thanks for your time. -
Weird problem on a C2924M-XL with a WS-X2931-XL and WS-G5482 GBIC.
Hi guys, I hope somebody can help me with this weird problem. A couple of days ago, I purchased a WS-X2931-XL Module and a WS-G5482 GBIC to go with it. I installed them today, made sure the screws were tight and the GBIC was inserted properly. I plugged a computer into port 1 and the router...
