Search results for query: *

Thanks Matt. Much appreciated! Got there OK... (Now if I only had the correct password....It's always something :) Thanks again.

I have a remote S8300/G350 LSP setup in Australia operating as the DHCP server for the phones (96xx). We would like to edit the scope and redirect to a different http: server. Can this be done remotely, or is it necessary to connect to either the services port or the console port. I can get to...

I have a Vodavi SP 1428 to install. I have initialized and was able to access admin via station 100(password **3226). Would like to program via the serial interface. I made the cable and configured communications as per manual specs. I can get SMDR output and password request/system info to...

Thanks Tom and amriddle. I was an idiot and had an IP in the wrong field (license server)where not needed. As for phone upgrades...had to use a 3rd party tftp sever as the Manager one only seemed to work with the config updates. Thanks again for your assistance...where do I send the beer? Just...

I was able to get into the IPO w/ the admin/admin (Thanks!) But the IPO is not coming up and I am getting the following error msgs in monitor. The 3.55 address is the PC running Manager. 108567mS TFTP: 10.1.3.55 TFTPReader: token/JRSC99VP3IhPzEd40pjd2KGVg6cvx3Q/200901290922 108568mS TFTP...

I have performed the upgrade and it appeared to be successful (except I forgot to update the .bin files to the tftp server...so the telephones displayed "waiting to upgrade firmware). I placed the 4.2.11 bins on the tftp server and rebooted. I then tried to login to the IPO to verify I had the...

Hey amriddle01, Tried again using the lastest release with the same exact results. Any other thoughts? Thanks, Russ72

Thanks for the response amriddle01. In your post you reference upgrading Manager 4.x twice....am I missing something? Also, is there a problem with backwards compatability on the Manager? If memory serves, I had similar upgrade problems using a previous version of Manager (5.1(29) I think)...

I have tried to upgrade an IPO 406v2 from 3.1.29 to 3.1.999 in order to bring it up to 4.x. I am only upgrading the control unit at this time. The upgrade wizard gets to 99% (checking) and then returns error msg "Transfer Failed". I have read a number of the tech bulletins (including 36 and 80)...