Search results for query: *

@cook1082 I thought of that, but their IT guy slapped in a fresh (dumbed down) switch. Also, it does reply with about 20% ping requests. @telcodog I considered that as well, but we had just the BCM and my laptop as the only devices on the second data switch we tried. Thus alleviating that...

Yes, we added a 2 SIP trunk key code. The trunks will be between sites. DHCP is disabled and the network interface is correctly configured.

I just uprgraded a BCM50 from 3.0 to 5.0 without a hitch. The customer is to be getting SIP trunks, so their BCM will now be connected to their network via the LAN1 network port (of course). We are having issues communicating with that port if it is connected to a network switch. If I connect...

You can get the patch right off the Nortel website. Should be the latest bcm450 update. I had this problem last spring with an install, and the patch did as promised. I wished I'd had updated prior to the install.

Have you added the new DNs via Telephony Resources > IP Sets > Configure ?

Ductape. I believe we have a solution. It's worked for our setup anyway . . . 3 weeks with no complaints from the customer. Hopefully your setup is the same. Ours is a MICS with a PRI connected to a 5ESS switch at the C.O. This link http://www.pbxinfo.com/forums/showthread.php?p=50382 shows...

They're at 5.0. Do you know of any documentation from Nortel that could back that up? Not sure if my customer wants to spring for an upgrade on something that's not a sure thing. But if there was something official I'm sure they would then.

Easier said than done. It's intermittent (maybe a couple times a week) and it only happens early in the morning. It's going to make it hard unless I meet them there extra early each day, which I just may have to. If I do, I'll definitely check each channel then.

covcom? Has this been resolved yet? I ask due to the fact I've a very similar problem.

I have a customer with a PRI entering their MICS. They have reported a few times now that sometimes (not always) they will try to call out and when they hit the last digit, the call drops, their line button LCD disappears and the phone returns to 'on-hook' status. We have been there several...