Search results for query: *

Well got it. The issue was with the usage. Line 1 was trying to conf with Line 2 which is not possible.

Hi, I have 4 console in my sites.When trying to make conference, i am able to get up to 2 people and then when i hit the conference button it disconnects the call.Transfer is working fine. Only the problem with Conference.Can anyone help me out. >ld 21 PT1000 REQ: prt TYPE: att TYPE ATT_DATA...

Can some one guide me on how to connect a PABX to BCM400 through PRI? I've a v.32 card for the BCM. Thanks, Amit

Sites are connected through ITG Trunk.

Well switch is 11c 25.40B and Call Pilot 2.01.27. The Call Pilot is located on a different site though. VM # in the switch is configured as CDP->DSC. Also, when I remove the revert DN, and a call comes to that extension and it goes to VM, then 2nd call comes to that extension but heads...

Well it seems issue with all extensions.

Its Call Pilot. Revert DN is set to reception. Removed it, still no good.

ext 4608: the first call goes to 4608 when busy it goes to voicemail, if a third calls comes in the call does not go to voicemail, it goes to the revert DN of the mailbox. This occurs when the second call is currently leaving a voicemail. Any help?

Thanks a ton.

Hi there, I've this unusual problem. Follows.... 3 extensions MWLamp is constantly on, swapped phone sets, removed mwa key, re-configured extensions, but no good. Sending across the configs.. ==================== x1021 follows... ==================== DN 1021 CPND CPND_LANG...

Could someone help me with the commands for giving an INI and SYSLOAD to small and large systems? Thanks in advance, Amit De

extension can receive internal and external calls bit can't make outgoing calls [internal/external]. Its an analog extension. Thanks, AD

Hi following I got from the pdt logs.... 213 :(28/4/06 17:17:56.444) BERR705 EXC 1: Bus Error in Task "tSL1" (0x8d10fe0) SR=0x3000, PC=0x5017aea, Addr=0x13122f80, SSW=0x850010 214 :(28/4/06 17:17:56.449) BERR700 EXCH: Threshold exceeded; vector=0x2, PC=0x5017aea, fault...

Hi, I am getting these continous unknown errors on my 11c mini rls 4t.... APR 20 11:02:05 VGW: Warning channel 8 received invalid User Input message 12 from Call Server Any help????? Thanks, AD

Is this wht you are talkin about..... OVLY SID 0 BKGD 044 PBXH 01 TODR 01 DROL 034 037 038 043 044 060 135 137 <------ MID's ???? MULTI_USER ON Thanks, AD

Didn't actually get your point. Its affecting the entire site, I mean the display on all the phoneset shows wrong time. Well I logged into the switch and did ttad and found clock 4 mins ahead, then I did stad to set the exact time. Also, I logged into ld 77 and did DLMP 0. Thanks, AD

Hi, Time on 11c rls 3 is gaining clock. I wanted to know the time adjustment feature in ld 2. Wanted to know the usage along with the idle parameters[adjustment 1-60 seconds] for printing and setting it. Also would lamp audit help in this regard? Thanks, Amit De

Also, is there a way to give a remote INI or sysload to these systems? AD

I tried pdt, it didn't work, tried ld 143, does not exist.

Hi, System is 1000M, rls 4. Complaints of echo, static, and silent calls in the calls centre on network calls. Site has network SCCS too. Getting the following BUG messages in 2 of their sites.... BUG9801 BUG9801 : 14 51 28 15 2 1 1 1 1 1 64 - 4 0 BUG9801 + 006C3F44 08C6D3FD 00DE1B1E...