Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. CS1Ker

    Ntp service not updated

    When you are running NTP you CAN NOT manually adjust the time without first stopping the NTP service. The CS Mode and SS Mode for the NTP setting is only used to determine the route used to contact NTP server. If you can ping the NTP server from the CS then you can leave it in CS Mode if you...
  2. CS1Ker

    X11 call flow?

    In EMEA Option 11C software was provided with prebuilt routes to speed up installation. These routes will not contain a trunk but will be configured for different Service Types. Some distriutors will remove the pre built route to tidy up the system, most don't. I believe the list below are the...
  3. CS1Ker

    High Path 8000 to Nortel Communication Server 1000 via SIP

    Any assistance greatly appreciated. Has anybody setup a SIP connection between a Nortel Communications Server 1000 Rls 5.5 and a Siemens HighPath 8000. I have had this request from a customer but have no experience of Siemens HP8K and can find no interoperability information on either...
  4. CS1Ker

    CS1K to Siemens HighPath 8000 via SIP

    Any assistance greatly appreciated. Has anybody setup a SIP connection between a CS1K Rls 5.5 and a Siemens HighPath 8000. I have had this request from a customer but have no experience of Siemens HP8K and can find no interoperability information on either manufactures site, even within the...
  5. CS1Ker

    Network Timing (NTP) from EM

    Hi SL1M1 I have had to make these changes on several systems but I'm afraid I'm old school and prefer to do things on the command line. Below is a step by step on how to set the NTP and ZDST, which you may require, from the command line This checks the time against the NTP Server every 15 mins...

Part and Inventory Search

Back
Top