Search results for query: *

it’s funny how much time I spent on this, it turns out that in the Yealink phone settings you just had to set callerid source = PAI-RPID-FROM and everything worked. I couldn't think that the problem was on the client.

it turned out that I was a little wrong, in the log on siemens in the invite package, I saw the missing number, here is the situation and screenshots again. In this example, number 5073 calls to 5070 (both of these numbers are on the same gateway 102.211), then number 5070 transfers the call to...

hello, here is this COT on the trunk: COT: 25 INFO: COT FOR PBX DEVICE: INDEP SOURCE: DB PARAMETER: PRIORITY FOR AC WILL BE DETERMINED FROM MESSAGE PRI TRUNK SIGNALING ANSWER...

Good afternoon, colleagues, I ask for help. There is a sip-trunk hipath 4000v8 <-> Asterisk (pjsip) For example, if subscriber 1111 (hipath) calls another subscriber 2222 (hipath), then subscriber 2222 (hipath) transfers the call to subscriber 7777 (Asterisk), then subscriber 7777 will see the...

I didn’t guess something before, because the reg command gave out only one fctid value, I thought fctid2 should be left empty or zero, which I tried. Everything worked out, I realized my mistake, thank you very much, have a nice day

Good afternoon, colleagues. I ask for advice. On my hipath 4000 v8, the stmi2 board with hfa subscribers failed. Today they will bring a replacement stmi4. I will change it, but I would like it with minimal effort. I'm trying to change the part number of the board in advance, is this the only...

Hello colleagues. Please help me to solve the following problem: Hipath 4000v8 connected via sip to Asterisk. When calling from asterisk to subscriber 1111, at this moment subscriber 2222 picks up the call, but on the display of my phone I continue to see as if I'm talking to subscriber 1111...

Thanks again. I have successfully updated my version 519 to 527.00 and after that I was able to update 527.00 to 527.02. My license works too. Thank.

damn it, this is a hotfix, now it needs 527.00 and this is already v8, not 7, so neither will work for me. Nevertheless thank you.

Thanks a lot, but version 10 won't work for me. I only have a license for OpenScape Deployment Service V7 Could you upload the latest version for OpenScape Deployment Service V7?

Can you upload again please?

Let me download dls version 527 or higher because I need it please. the link does not work I have 519 but it is already out of date

Wow! Ok, thank you.

Hello again. Does anyone know how to extract a pcap file from a stmix board? Everything was simple on stmi4 boards: I go into maintenance -> Traces & Events -> Load pcap Trace File But there is no pcap trace on the stmix board I think I found it on the stmix board elsewhere When I do...

OK understood. Thanks for the detailed answer.

ADD-TDCSU:OPT=NEW,PEN=1-02-011-0,COTNO=20,COPNO=20,DPLN=0,ITR=0,COS=20,LCOSV=32,LCOSD=32,CCT="TEST",DESTNO=20,PROTVAR=ECMAV2,SEGMENT=8,DEDSVC=NONE,TRTBL=GDTR,SIDANI=N,ATNTYP=TIE,CBMATTR=NONE,TCHARG=N,SUPPRESS=0,TRACOUNT=10,SATCOUNT=MANY,NNO=1-1-20,ALARMNO=2,FIDX=1,CARRIER=1,ZONE=EMPTY,COTX=20,FWD...

Thanks for the help I already tried with outpulse. Ldpln is 2-xxxx I tried: npi,isdn,international, outpulse=2, echo 2 It turns out also. TO:25075@ipaddress no plus sign = no parameter (user = phone) :(

hi, with National TO:25075@ipaddress it's without user=phone and plus

Hello, sorry for my english, but I need help. I connect to the mobile operator via sip. they want me to send them the "user = phone" parameter in the INVITE in fields TO and FROM. I found that hipath adds this parameter (user = phone) only if the number is transmitted in e.164 format. In other...