Search results for query: *

I have a core that has a System State = Not Available status when I do a stat cpu. The active core is good a healthy but the standby is not up. The CP CIV card has power and the CF light is blinking every few seconds. The Sys Util card has a red light and nothing on the display. I've put in a...

I have a wierd issue on my switch. We have 3 phones (we will refer to them as A, B, C) all with the same number (DN 200) on a button on all phones. When a phone call is received on DN 200 phone A will answer, then phone B, then phone C. Its all fine and dandy until phone A or C hangs up. For...

I just want to know if it is possible to transfer a backup(EDD) from one CS1000 to another? We have multiple switches we want to make a mirror copy of them.

Might want to look at other factors besides the phone switch. I had this happen to a customer one time and it turned out to be a faulty UPS battery. It would run a self test every day at 2pm sharp and reboot the switch. Also had the same thing happen to another switch and turned out to be every...

Are you running a domain? What OS are you running on the desktops? Do you want the link at bootup or login?

For reference if anyone is searching this post in the future he is info about how the MWI works. I wished I would of had this article when I started to trouble shooting this issue. I was always under the impression that MWI was trigged by a voltage similar to ring voltage. I guess you learn...

Thank you very much. Now I can give this wall a break from me hitting my head against it.

I have a MCK key on a digital phone and tired that. I think the reason they are not turning off is because of the brand of phone they are using. But I still need to figure out how to make the light. Does the XCMC card have anything to do with the MWI? That card went out during the power cycle...

Last week we had to hard reboot our CS-1000 due to a UPS outage. Now all of the message waiting lamps on our 500 sets are stuck. If they had a message then its lit even though they check there messages and if the didnt have a message it is off even though the receive a new message. I did not...

You refer to paper clips as INI keys.

During a recent UPS cut over I had to bounce power to our CS-1000. After the 1st power up I noticed the XCMC card wasnt up and of course no analog phones were receiving caller ID info. I tried an ENLC on ld 32 and received an error that it could not see the card. I changed slots and...

To save a word doc you type "LD 43 EDD

I will start this classic post with an easy one. "When counting you always say ZERO then start with 1,2,3.....

Just as a follow up the restart went with only minor issues. I just shut down it down IPE 1st, then Cores using the breakers at the back (not the breakers on the front). I had a few phones that were disabled but took me only a few minutes to track them all down and enabled them in LD 32. Thanks...

We have to replace our batteries for our UPS and to do this we must shut it down which will kill power to our Nortel switch. It is a CS1000M with two cores (OPT 81). What is the proper way to kill power or do we just backup and unplug the thing and hope for the best? I don’t think the thing has...

Does anyone know what encryption algorithms Outlook uses? Or know of a good site where I can find this info? Also is PKI considered an encryption algorithm? Thanks

Thanks for the advice MossEng. I think I'm going to swap the PS to that shelf. Do I need to take down the loop when I do that and is it hot swappable?

Over the past 2ish months we've had about 6 ALCs go band on one of our shelves. It is isolated to this one self. Only the ALCs are going bad and the DLCs are good. Every attempt to do DISC and ENLCs fail. Also if you move the card to another slot and equip it, it’s still bad. Reseating it does...

We do have some analog trunks already but they are only for receiving emergency calls and they are usually life or death calls so those are out. Is there anyway I could maybe set aside 2 local channels and 1 long distance from the PRIs with higher FRLs or is it an all 23 have the same FRL? BTW...

I have a Opt 81 CS-1000 swith with 3 PRIs (2 DID Local, 1 Long distance) trunks. Every time there is a "big" event all of our trunks will lock up because users are calling family to check on there welfare. We have certain people that need to be able to make call during these events. Is there a...