Search results for query: *

Hi Tman45, so do you advised to disable MC32s? I am hesitating to do that coz this problem was not appearing continuously but after one or 02 month. However let me talk with other tech on site if we could disable MC32s for a month or two. Thanks

MGC= NTDW60BA E5 DSP 32= NTDW62AA E5 DSP 96= NTDW64AA E5 This problem is occurring continuously after installation. We replace LAN switches, updated patches 02 times (last patches/loadware update was a month ago), replaced MGC with daughter board but still gets Err008 randomly. Anymore advice?

Hi CS1Kfan, actually these are 11c cabinets not chassis and i didn't mention complete cards located in MGC 4-0. There are 03 PRI card, 01 MGate card,One 32 port MICB, one DLC card and one analog card. System slots were assigned as per Nortel bayface layout. Any more advice? Thanks

Sorry guys for delay reply due to Sat/Sun off. Yes i double checked DSP D/Brd config and MC32s Slot/Config and these seems to be OK. Actually this problem is random i mean appears after every month or two. To clear thing i have 04 Shelves MGC= 4-0 (With both DSP D/bard,96 on Pos-1 and 32 on...

Hi all it is CS1000E, SA release 5 with 03 MGC (4-0/4-1/8-0). With all patches/loadware update. I randomly get ERR008 on any MGC and that MGC gets fast busy when it dial other MGC`s extension and i have to reset complete PBX. All DSP shows register when problem appears. It happens after every...

Thats OK, but why we need a separate SS to setup as SIP proxy as we can configure this in Leader SS also? I mean in what situation we use separate SS setup as SIP proxy. Thanks

Thanks all for helping and i will do as you all advise. Sorry if i am asking many question in this thread, Actually i am new to multiple SS installation, i have done many SS installation but these were standalone or leader. Can you explain why we use SS as SIP proxy?? what job SIP proxy do? and...

It is new system,and i am going to install.It is a multinational company having multiple sites around and having CS1000E at many site, NRS is already setup at main office and i am installing this new CS1000E rls 5 with 04 SS. I got instruction form there main Site IT that 02 SS will be use for...

Hi, i am installing a CS1000E, HA rls 5. with 2 signalling server for LTPS only and 2 signalling server for SIP proxy(for redundancy). This site already have a NRS setup with Primary anf Alternate SS at other location. Now i need some advice from you all in following (1) While Configuring...

Quote:- If you are not Dual-Homing the MGC's then use the E-LAN and T-LAN connectors on the back bottom left of the chassis. Run a separate patch cable to the E-LAN connector of your Call Servers. We are not using dual homing, can i use front Elan/Tlan of CPPM and MGC as in 11c cabinet for...

Hi, We have purchased a CS1000E, rls 5 HA. I have got 02 CPPM/4 MGC cards and 04 media gateway chassis (NTDU14). I need help for connecting these media gateways. How can i interconnect these chassis. I was reading NTP`s but could not understand. I have installed CS1000E with cabinet system, this...

Any more help in this regarding Do i have to define site a and b both in collaborative server and do i have to define all endpoint(as in primary NRS) also in new standalone NRS??? What will be the advantage of creating a new standalone server and defining BCM as end point and defining site a...

Hi john, thanx for explaining how ever need some more brief on this. (1)Is it 30Kbyte per call on E1???? if yes this means for one E1 link if all channels are busy then 30x30=900Kbyte required??? (2) In this case i think it wont disturb data communication as it is consuming 900KB...

Hi we have 02 cs1000M site, one is release 4.5 and other is release 5.5. These 2 sites are using a 2MB data link use for LAN/Internet access. Now customer is installing CISCO router having E1 card in it and we are ask to connect both PBX using E1. We have installed PRI cards at both ends and...

Thanks Reusser. Do i have to define site a and b both in collaborative server and do i have to define all endpoint(as in primary NRS) also in new standalone NRS??? What will be the advantage of creating a new standalone server and defining BCM as end point and defining site a and b as...

Hi I have following 03 sites connected through SIP (1)SiteA, CS1KE Rls 5.0, Primary NRS (2)SiteB, CS1KE Rls 5.0, Alternate NRS (3)SiteC, BCM400 Rls 4. Now i have another site having CS1KE rls 5 available to tie with above sites using SIP, My question is (a) I wants to TIE this new cs1ke with...

We have 02 remote shelves with 50 analog extensions at both sites. Both shelves gets down randomly and not at same times, i m getting random AUD errors also. Regards

i, it is 61c rls 4.0 with 02 remote shelves connected through fiber. Now so oftenly i get no dial tone/call drop problem on both these remote shelves and then gets OK automatically. Patches are updated. What you guys suggest?? from where i start to rectify calldrop/No dial tone problem.What...

Hi i have a callpilot Mini with 11c cabinet release 5.5 installed. We have a extension which is FNA to other extensions. Ext225 FNA to Ext229 and ext229 is FNA=700 for voice message. Now when a call hits ext225 then FNA to ext229 then goes to mailbox but this voice message save for ext 225, i...

Hi, I have a CP Mini hook with cs1000 Rls 5.5. My main/company greeting is working OK, now my boss wants a new application or greeting setup like as follows. After an incoming call user heards company greeting, he dials an extension and if extension gets no answer then an other greeting should...