Search results for query: *

Hi all. Do you know where Ericsson digital terminals can be purchased? I need a dbc 214 or 224 at least. In Spain I don't know where they can be purchased. Thank you and Merry Christmas

Thank you. I already have that modem but it doesn't work properly with rasc. Can you give me the modem init string?

Good morning, the modem we used to connect to RASC and BMS has broken down. We have tried with other modems but they don't work with RASC or have problems with BMS. Do you recommend any modem that can be purchased today. Thank you.

Good afternoon, I needed to know what type of signaling the BTUA is compatible to receive the calling number. The idea is to see if it is compatible in any revision with a mitel TA7102 adapter. thanx all

Hi I think you can just return it to factory settings or software to be tested keys.

hi I have Panasonic analog terminals connected to a central BP. The Panasonic flash time is 98 ms terminals and central BP 90ms. When we make a call from the terminal if the R button is pressed the call is put on hold and if we press the call recovers; but when we got a call, press the R button...

Quizais querías dicir: el problema estaba en la PSUSENES the problem was in the PSU-M no w replaced. The Sd is xc? ow i have a tvm conected to the dhlc8, when I connect a new phone sometimes does not work, restart any board and then work . does not have to be the same board (dhlc8) i restar the...

restarts conytinuosly with a reset.

Yes, I could charge default files to the sd but and booted. But after a reboot has continuously restart again and the same process has not rebooted.

Thnx otoni, I realized the process to initialize the pbx and when I pass to normal the switch, the pbx reads the sd card, run LED flashes , the MPR stop reading the SD and alarm/run LEDs lights at the same time and repeat continuously the same sequence. :/

hi i load a backup to tda 100. i have an error and after restart the system, load the sd and turn on the red led and the pbx restarts continously. i try init the system but dont work , and erase the $files with the same result. any idea? thnx

How I can pick up a call from a terminal 4214 DBC's ringing on a different extension whithout use hunt groups? I tried with direct hunt but dont work. when extending the number framework to capture screen shows me "no wait" and will not let me perform any operation more. I have been tested...

Hi,somebody knows the ms of DTMF tones for spain. rhnx

Hi i have a bp 250 with a gsm router. When income a call to Automatic attendant the callin user press a number extension and finally the call go to these ext. well this not work with all moviles and some gsm routers, how i can configure the dtmf tones to detec all numbers sent from gsm router...

Hi all! i have a bp 250 and some outgoing calls cant be procesed. i see in errors logs a ek error (The current EK-state was not compared correctly to the current process / instrument state, e.g. there is no free EK, but the instrument state was indicating that all EK’s should be free). Anyone...

Hello. We have a BP50 with mobile access working properly. For some days we get busy and traces shows the msg: Cause No. 42 - switching equipment congestion msg on traces. What could be? thnx. We restarted the pbx but did not solved.

Does the update requests aastra? As if you change the R16 eepromps by some of the central license in R14 leaves or remains in R8. This system has a cash card IPU. what if we update the SW to R16 must request a license upgrade? thanks for the help.

Hi, I have a D5 Cpu version R14 and R16 would like to upgrade to a BP 250. Do we need to update the license file?. What steps should be followed? In the official records do not specify whether you need a new license file from R14. Thanks and Merry Christmas!

i have a bp to mitel by RDSI then mitel to mitel by sip and finally other bp. Can i change the CPN with this configuration? thnx

thanx the code works i have dt 292 and dt 290. thanx for all.