Search results for query: *

A star to Westi, after installing a Valcom VMT-1 problem was gone!! :-)

Hello everyone, is there an easy way to assign 4 HuntGroup Enable button on a softphone? (user is member of 4 different group but do not loggin in all group all the time) Thanks

Westi , ive done a lot of paging with IPO and it`s only the second time that i have this problem.. And like you said, i connect my butt set and there is no "hum" the only thing i didn`t try is to get the IPO ground directly to the amp. But thanks anyway for the response :-)

analog station port

Hello everyone, I have "hum" problem when i convert an analog extention to a page port with a 70V amp. Paging is working but there is always "hum" coming out of the speaker.. It look like if there was somekind of voltage on that port or something like that..any hint why?? When i connect same...

Thanks forgot the one under user... :s

hello everyone, i have hunt group missed call log issue with 1616 phone on IPO 5.0.20. It just dont see it. When i replace it with an 5610 phone, hunt group missed call log work fine. Any idea why?? Thanks

No ther are not tick ex directory..everything is triple check!! It is an issue somewhere believe me!

Yes, when we call the extension, it`s teh right name that`s palying. And we have the issue with all user..

Hello everyone, I have a issue with the dial by name on embedded VM on release 8.0.44 All user have record there name correctly and configuration is ok in the manager. When we go into the dial by name by pressing "#" and i dial family name, VM keep saying " no name was found " Any hints? Thanks

Hello everyone, we send to one of our client an 5410 phone that was on a previous R6 version. The customer now is on IPO 406 running 4.2 and the phone stay at "please wait" I know there was the ALLOW_5410_UPGRADES on the no user source tab to upgrade the phone but is there anything i have to do...

Yeah i know, to many people have access to that server, i was only trying to minimize de damage.. :-)

Hello everyone, is there a way to put a password on the VM pro client install on the server itself and prevent anybody to go modify the VM config? I saw there was somekind of config into the administration of the VM pro administration tab and in the security settings of the IPO but doesn`t seem...

Thanks Telecomboy, it`s working now i change the gain to -.5 for each line and work fine. :-)

budbyrd, i have already try long CLI with same issue..

Telecomboy, move both gain to -.5?

amriddle01, when CID is active on telco, the data is passing after the first ring, when it`s not active, when we monitor the line with a test set, there is no data passing thrue between the first and the second ring. this is how we know if caller ID is on or off from provider. :-)

I connect my test set directly to the primary line and i heard the data passing trough. This is how we test the CID here in Montreal with all telco providers :-)

I didn`t check on monitor yet, it was my next step. And yes i`m sure caller ID is on by provider! :-)

Hello everyone , i have an CID issue with IPO 500V2 release 7.0(30)on analog trunk. I`m sure that the telco provide the CID i test it with my testset, but it just dont work on the IPO. I have replace the combo card with same result...no CID. All line are set to Loop Start ICLID The incomming...