Search results for query: *

Hello,I Havre S8300+G450 main an 4 S8300lsp+g450 in 4 different suites, in 1 site in 10 Phone 9611G I dont Havre a dial tone. I chance the Phone, I did test dsp in g450, I chance dsp card in the g450, I test the G450, I have always the same problems in the same phones in the same branch.. Any...

Hi, In avaya R6.1 are there different between analogic digital or ip licence? Tnks!!!

I've 2 call-app open on station 8888 and two station with brdg 8888. the station 8888 go to cover 26 for busy goto vdn 1111. vdn 1111 go to vector 22. vector 22 go to annuncment 11 and than route to station 8888. So if I call 8888 when the channel are busy, I listen the annuncment and then the...

Yes sorry!

Can you explain exctly the procedure? I know that i can change the psw in ld 22 Ch pdw Bat wich one is the level 1 or 2? How? Then I ve to reboot the cs 1000? I ve to do that on cs1000 and 2 minics1000 Thanks

I ve the second level password. My release software is 5.50. Thanks

Hi, anyone know how to change the password level 1 about nortel cs1000??? Thanks!!!!!

I tried these but the problem is that the voice messagge start when all the 10 channells about the 5 users are busy and there are 2 calls in queued. Thanks !!!!!

Hi I've IP èPhone 9611g avaya on Aura R6. I build a vector that go to check in holiday table and if ok go to hunt gruop 2 in hunt group 2 I've 5 phone number in mode ucd-mia no acd vector yes no queue. Every thing work fine!!! The problem is thath I need in incomimg maximun 2 calls after have...

ok thanks!!

Hi guys !! Anyone to Know what's significate when nortel cs1000 come to call by other nortel 11c o avaya when the display show DN L,N,H....(2036 N - 2036 H - 2036 P- 2036 L) ???????? THANKS

This is the main nortel dch trunk-avaya: REQ prt TYPE adan dch 44 ADAN DCH 44 CTYP MSDL GRP 1 DNUM 15 PORT 0 DES AvayaISGF USR PRI DCHL 44 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ISGF PINX_CUST 0 ISDN_MCNT 300 CLID OPT0 CO_TYPE...

I' ve a CS1000 meridian whith 4 other centrals Meridian 11c in trunk ip. I've a avaya trunk qusig on CS1000. Now, when Avayal call CS1000 on the set display I see the DN (es. 5012), correct. But, when avaya call other centrals Meridian 11c on the display i see more 3 digit (es. 0005012)...

I correct in the DMI ctpy in NPA and now work good!!!! Thanks!!!

LIKE THIS DOESN'T WORK!!![thumbsdown]

I confirm that is possible to remove COLP whit the prompt XCON and I did to remove that but doesn't work!!!!the ID number pass us well!! After i try my new configuration whit DMI......I wish... Thank's a lot!!!

I've OSGF protocol in use... and I tried to get out COLP but was the same. Now I create an other new RLI 45 that go to DMI 44 and goto the same route 44: REQ PRT CUST 0 FEAT DMI FEAT DGT DMI 44 DMI 44 DEL 6 ISPN NO CTYP UKWN I've to check if work!!!

I Guys i've a big issue. I've a trunq qsig nortel cs1000-avaya R6 every things work fine but when nortel or avaya mask the dn this work just in local central: if nortel call nortel mask--->work good if avaya call avaya mask--->work good if nortel call avaya local dn 3467 --->doesn' work avaya...

Hy Guys, I have a master dlc0 whith the main entrance door and I have a secondary DLC1 and S8300 LSP to another place whith 2 media gateway. If the IP address of the first down the trunk mediagateway go to record properly in dlc0, while the Secon go door to record the S8300 LSP incorrectlyon...

Hy Guys, I have a Master dlc0 whith the gateway main and I've a secondary dlc1 and the s8300 lsp in an other location whith 2 media gateway. If the trunk IP go down the first mediagateway go to record correctly in the dlc0 while the secon gateway go to record incorrectlyon the s8300 lsp server...