Search results for query: *

Be careful with memory - it may not be proprietary, but the number of refurbished CPMG cards I've seen that don't boot because of non-Avaya memory is pretty staggering.

Service Pack 9 was just released within the last few weeks. Should be available via the ESPL website. Includes PBX and Linux patches.

No changes should be necessary for CM, etc.

Try this command: service gatewayUI start Also, be sure you are accessing it like this: https://<ipaddress>:7443

Your right - my apologies. You do have to install 2.5.0.0.177 first. I believe I followed the same steps though - changed the ADS_Response.properties file to accept license and then ran it in unattended mode.

I skipped the Java upgrade when I installed ADS 2.0 and was able to upgrade to 2.5 SP3 without it as well. Are you using the most recent 2.5 SP3 file? There was an issue with the previous one related to the install/upgrade. The one I used was ADS-ServicePack-2.5.3.0-254.tar.gz. Also - I...

It's probably looking for the correct folder/directory structure. If you are uploading an Archive, the folder would need to be located in the ARCH_DB folder. As an example, the database would be on your desktop under a folder called ARCH_DB, which would have the "Site1" folder in it, which would...

I have a sig server running on VMware in our lab, but I don't know of any way to get the PBX up and running - it still needs a dongle.

I think the correct part number should be NTC06502BUE5 - that shows up as a BCM450 R5 32 station bundle.

*SHOULD contain...

NTHU61JA contains: NTAK11BDE5 Cabinet AC/DC Option 11C Main and Expansion 1 NTC325BAE6 Call Processor Serial Port Adapter Kit 1 NTDK48KAE6 Cabinet and Chassis Main Cable Kit 1 NTDK70BBE5 11C / CS 1000M Cabinet AC/DC Power Supply (for NTAK11) 1 NTDW59BBE6 CS 1000 CPMG 128...

Not being able to ping the NTP or DNS shouldn't matter. We build them in the lab all the time. It will need to be able to see the System Manager during the install process though.

You need to run SMnetSetup first, then INSTALL the software - it's not an upgrade. I always do it via DVD, so the commands may be different, but after the DVD is mounted I run this command: ./install.sh If I was upgrading it from a previously installed version, I would run the ./upgrade.sh...

Can you get in through the management port (eth0, RIGHT side)? Maybe a silly question but since the ports are swapped/backwards from the G7 are you sure you are plugged in to the correct port?

I believe the 1100/1200 series phones would need to be SIP to be used with the IP Office Branch solution (firmware specific to the release of the IP Office). The 9600 sets would not be compatible with the CS1K. You could standardize on the 1100/1200 and just change firmware from H323 to SIP (or...

Shouldn't "SIP3" be used at the UXTY prompt?

And WinSCP/SFTP definitely works on a VxWorks call server - at least on 7.6.

If you want to get really crazy, you can WinSCP/SFTP directly to the /cf2/ directory as well.

It does give you the option to load it on the RMD, so it may not be on the install media, but it will be on the backup!

Courtesy of this thread ISM Parameter Upgrade for Large System 1. On a PC access the PBX with HyperTerminal. 2. Place keycode diskette in A: dive of PC or have Keycode.KCD file on your PC. 3. Log into PBX. 4. LD 143 5. KUPL 6. Click the Transfer menu in Hyper Terminal and...