Search results for query: *

trying to load new au prompts on an emg80 phase1 and cant remember how to. any ideas?

Hi you have set your lines to ISDN and need to change back to analogue pots. pgm 140 set lines as 1(normal)

Hi lines go in lco1,lco2 pins 1&2 and 4&5. MBU MJ1(CO) Connector Socket Pin Number NO SIGNAL NAME RJ45 1,2 CO-R, CO-T 3 Reserved 4,5 CO-R, CO-T 6,7,8 Reserved extensions in dkt1,2 etc pins 4&5 (centre pair) Connector Socket Pin Number NO SIGNAL NAME RJ45 1,2,3 Reserved 4,5 DKT-R, DKT-T 6,7,8...

Hi all I am trying to use Mynetfone sip trunks, these are ip authorised ( no user name and password). Incoming calls work for 30 seconds then cut off. I have been told this is because the system is no sending the site ip address, where is that input?? Also when its been idle for a while incoming...

hi this used to work on the aria 24. press Conf after calling the 1st party. Then after calling the 2nd party quickly press Conf , digit 2, then JOIN to connect all parties.

Hi has anyone managed to log into the w-soho lws-bs using the lan? I can get to the front page using the ip address but there is no where to input the user name or password.

I used to be able to log into my ipecs lik with internet explorer, chrome and firefox until recently. Now ie tells me it cant reach the page. chrome says This site can’t provide a secure connection 192.168.1.253 uses an unsupported protocol. and firefox states, Secure Connection Failed An error...

what is the unified software version number. The latest we have is A.0Kk.

brilliant. thanks to all.

Hi all. is there a way of sending 2 different cli's from 1 handset, eg customer has 2 companies on one 100 number indial range and wants to be able to make calls from 1 handset but send the outgoing cli for each advertised company number, extn 208 sends cli 200 when making a call for company A...

thanks thermus

Hi Thermus, yes you can hear dtmf tones on outgoing calls to a mobile. isdn2 lines yes upgraded over the years I have gone from ver5.0 through different upgrades one being 5.5 now to 6.1 just tried incoming cll to the system from my mobile and its now sending dtmf on an incoming call. its...

running 6.1Cd

Hi XS650thanks for that but it is already on. what I need is it to send when I have answered the call on the ipecs and am trying to access an external site , ie the external site has called me back and asks me to dial 1 for connecting to an operator. I've tried from the lip and analogue extns...

Help. When an incoming isdn call is answered I need to send dtmf tones (digits)to the remote machine to operate various options this does not work, I called in from my mobile phone and tried to send tones (dialled digits from the keypad on the ipecs phone) and it doesn't send any. Is this...

Hi all. trying to set up phontage on an ipecs 50b ver6.1cd. I can call and receive calls to/ from extensions on the laptop. I can seize an isdn trunk and dial numbers ok but when I seize a voip trunk it then gives error tone and on the display says "error raised". All trunks are in the same line...

Hi Mark. why not send digit 1 to a hunt group with message then overflow to the extn required.

works, woohoo, many thanks

I have emg80 ipecs owa 1.0 software, it opens up and i get the expected window but when i try to upload a database i have downloaded it says its loaded but it doesn't show the customer data. On the live version it gives a reset tab after uploading but not on the offline. what am i missing? I...

Just asking if anyone has made any version of Skype work and if so which version? main carriers are supported here but not Skype.