Search results for query: *

I make a wrong information. AAIBE have only 3 min 20 second for user record. So It's not suitable for two way record. And more ,you can use the phone optional LDP-USB to individual conversation record to PC.

Hi, Both VMIBE and AAIBE can record the conversation into user mailbox. We call this feature as "Two way record to VMIB". The differencing regard to capacity of memories . For VMIB have basic 300 min for user memories and you can add-up 300 min with the optional card (FMEMU). But for AAIBE have...

Yes, with the kind of Auto Forward to VMIB you will not heard Forwad confirmation tone. And if you using version 3.8 up you can have a optional to disable forward tone in PGM 113 flex 17. This option can see only in DKT program mode.

I'm guess the "MWI tone" and "Forward confirmation tone" using the same tone. So when you activated the call forward you can heard the same tone.

Please try dial 559(Feature cancel).

Hi, In this case you needed to ring at several station when user dial "9". you was applied LCR to converse "9" to ring group 621. So you have to delete digit 9 in flexible numbering plan.I have no the other solution for this. Anyway the station 649 still Attendant(front-desk).So you can use...

Hi, I'm checked in your DB. I'm suggest you to delete digit "9" for attendant call in PGM 106/107 Flexible numbering Plan. And please change the type of station 651,607 to service. Please try again and let me know the result of test. Good luck,

Hi If possible,pls uploade the USR file and let me know the URL to get the file.

That SW is used for selection of short loop loop in some special country. [special country(impedance=600ohm): Standard.India.Israel,China. Normal position = Short loop Service position = Long loop Anyway there are not support the function of Normal/Service selection in ipLDK. You can...

As your pictures,Please change Index1,DMT123 to 1,1,1 For testing step. 1. Change the station 666 to service station. 2. Try to call 621 from an service station. should be ring at 649 and 666. 3.try to call 621 from an guest station.Should be ring at 649 and 666.

Hi, Please check your station 666. It should be "service" not guest.

Hi, PGM 181 Flex Bttn 10 : Paging Timeout Timer. (000-255)sec You can select the maximum time of page. The system will automatically disconnect the page at the end of this time unless the caller has hung up earlier.

Hi s70p72, Sorry for my late reply, Here is my guide to control LCR for your expected. Condition; Day time = 8.00PM and call to attendant(649) when dial"9" Night time = 5.00PM and call to hunt group 621 when dial"9". Programming; 1.PGM 190 Station hunting group Group number 621, Group type...

If you can specified the exactly service time of weekly. For example DayTime = 8.00AM,Night = 6.00PM. So you can use LCR feature to solve the problem. You should compare "9" and use only "LCR Internal Mode", on Day don't convert digit, on Night you have to convert digit to the pilot number of...

You have to check the timer DID/DISA no answer timer in System timer. The default value is "0" it's meaning no check for no answer. So change it to "20" or as you need. When this timer expired the call will go to the destination in PGM167.

it's good forum I have learned a lot of good experienced from worldwide expert guy and many of good solution from Doktor. Thanks very much

1> Ans ; In case the caller doesn't select any choice then it will look up for PGM167 (DID/DISA) destination). If Error destination is set to (Attendant) the call will be routed to Attendant station. 2> Ans ; please perform the following step, - PGM 113 Flex 2 ; "On" - record your personal...

Dear Sir, There are 2 kinds of SMDR in ipLDK. First is online SMDR,The call will be print out immediately after finished the call. The second is off-line SMDR all the call will recording to SMDR buffer. The are maximum 5000 records in LDK-300. To do the SMDR off-line please perform the...

Dear Sir, Could you try as adding the station who is attendant into Terminal group, for example group 620. And in the attribute of group 620 should set the overflow destination to VMIB1. And set the overflow timer as you need. In PGM144 set the incoming CO ring to "Hunt group 620". The...

Hi, Could you compare in PGM 114. Compare station port 1 with another port. Rg,