Search results for query: *

I am currently running a pre-packaged (off-the-shelf) file delivery service that runs within a web browser. This service has it's Web Interface set to operate on port 8080. For branding of this service (and for internal adjustment of user credentials) I am also running Apache 2 with PHP 5.6 on...

Thanks for the reply XrayboX. Although the table you reference shows COS 19 as "No Transfer", it most certainly does transfer the call if I dial the Bulletin Board extension (ie.: STAR 8, then BB ext. no.) so apparently some transfer is allowed, just not when the Bulletin Board is accessed...

On a Merlin Mail 007-MLM, I'm attempting to set a Bulletin Board Dial Zero option. A call to the Bulletin Board from an inside extension goes where programming is set to send the call when zero is pressed during the message. Likewise, if I call into the system on an outside line and expressly...

Thanks, Telecomboy. That's exactly the scenario I was talking about, too.

Is there a creative way to allow an extension to be a member of two calling groups with Merlin Legend, Release 7?

Back again with more upgrading questions. As outlined in this thread: http://www.tek-tips.com/viewthread.cfm?qid=1696139 unless you're a person that upgrades lots of phone systems, the Flashtools program is too expensive right now for a one-time use. So I'm now considering using a Magix...

I have a Lucent 15a Digital Announcement System and the technical manual that goes with it. But in the manual, it says very little about what it can be used for. It's mostly installation and configuration for systems but no examples of how to use it. I have a Merlin Legend and have the 15A...

Ok, one more question... Can my CKE4 processor be upgraded to version 7? I was just told only CKE5 can be upgraded to 7 but I'm confused... I thought those were only Magix processors.

I've read quite a few posts on caller ID for the Legend and was wondering what the lowest system version that can display caller ID is. I have Legend 6, version 11.0 Hardware Vintage 00. I know I'll need to grab some 408 GS/LS ID modules since mine aren't caller ID compatible and check the...

I've tried several keystrokes to break into boot sequence and otherwise communicate with both units using HyperTerminal, then Tera Term with multiple settings for serial communication. Neither seem to respond at all. Here is a link to several backdoor keystrokes I've been attempting...

Hmmmm, when I power the switch, I do see the unit performing several POST and opening image files, entering provisioning... then a blank screen with no login prompt. Anyone?

Yes, you are correct about the speed. I am attempting 8, none and 1, no flow control at 19200.

I just bought two 3Com 3870 switches (3CR17451-9) and am attempting to connect to them via the Console port. According to the manual, I should use a RJ45 converter cable pinned out this way: RJ45 DB9F 4 (DTR) ------------ 1 (DCD)& 6 (DSR) 3 (TxD) ------------ 2 (RxD) 2 (RxD)...

Recently, my workplace decided to open a small division of our main company and I'm attempting a Multiple Auto Attendant set up on a Merlin Legend 6.0, V11.0 running Hybrid/PBX mode and Merlin Mail 007MLM module. Merlin calling group 770 and coverage is group 30. System has two operator...

Thanks TTT. So any idea what those 299 and 7167 extensions might have been for? Looks like they're not being used so I might just delete them. (I do have a backup just in case.)

Newbie here. Like many folks in this economy, I'm wearing several hats and not accustomed to the Merlin system so please forgive me. My system, from what I've read here so far, what appears as a pretty standard setup. Merlin Legend 6.0, V11.0 running Hybrid/PBX mode and Merlin Mail 007MLM...