Search results for query: *

You could try the virtual XP I tried it and could not get that to work. I may have done something wrong though… the biggest hurdle is u need that Java with the old BCMS

I had an old PC I used and downgraded the browser until I could access it.. it was not ideal but it worked. I needed it to work on army reserve sites so I just left the pc that way and took it with when I needed it.

Yes, there is – we refer to it as Shared Call Appearances. It works just like a traditional key system for incoming calls… • i.e.: call comes in – rings at the first available line number key – is answered by pressing that key – can be placed on hold and will show blinking on all the phones that...

looking for the same answer but I think it works like a traditional PBX and not a KEY system. I did send a question to the engineer if I get an answer I repost.

check this out: https://pbxbook.com/meridian/install/pri_prog.html it tells you how to set it up and the proper interface to use.

On all trunk and already sent the lec an email

That is now turned on and it still is not passed the caller ID information. 14 01 24 is checked Also ran in INIT after turning it on

The ifc is not going to be an SL1 more than likely what are your options in the asterisk? That will have to match on both slides

12 lines I would convert them to SIP or PRI it will save them money and they will get better service plus u will look like a hero for saving them the money… six lines is about the cut off where they will save money and it will be allot probably pay for the system in about a year. If you have...

Con tel is correct u will have to use virtual extension but you will also have set a key for each virtual extension mailbox to check the VM I believe it is key 77. That will lite the key if someone leave a voicemail in the mailbox. Might need a sidecar depending on how many open keys they have.

I have an sl2100 it goes to an AA after hours which gives an option to forward for an emergency. This is working just fine but the person receiving the call is seeing the BTN I need to pass the original CLID information to the external call which is a cell. I’m using SIP trunks. I’m sure I call...