Search results for query: *

I thought about that, and the cust isnt willing to change a thing. I even put the old system back in service to do some test calls and sure enough, it did exactly what they said it does. The target line stays lit for the entire call and what ever set that line is assigned to and even flashes...

all the target lines are set to public. There are five sets that need this set up, like it was before. Some lines appear only and a few A/R. I verified this on the old system.

Heres the scenario, call comes in on target line 121 (mics 1.0 xc) (now 6.1 xc- line 157); call is answered, put on hold then voice calls or i/c to other party with the same target line appearence and that person is able to press the target line to pickup caller. Problem- when call is...

Those buttons are the right target lines. I wrote down all the programming from the old software just in case. I never checked to see if any hunt groups were set up. If I put them in a hunt group, would that work? If so how would that be set up?

I have a system that I upgraded from 1.0 xc to 6.1 xc. No problems except there are about six users that have all six target lines app. on each set. Some a/r, some just appear. the problem is, before the upgrade-when a person recv a call on a target line, it would show on the other sets. Then...

I have a network shelf/backplane that needs to be changed out. How hard is this and how much time does this require. I read the NTP but I would like a response from someone who has done this before. Thanks

It seems to be all the tns...2 anlg, 2 dgtl cards. everything has been replaced up to now. Thought I would check the buffer settings next.

I need to verify the buffer settings in ld 17, but I need to know where to find the documentation in the NTP's for the correct values for the opt 81c. My problem is every few days I get alot of err 030 on the same loop. thanks