Search results for query: *

I tried the load command and it worked great but then it failed again after about 1 hour of running. I finally reset the complete system and it seems to be running fine with now problems. Thanks for all of your help with this

I have not tried the load command and there are no alarms on the front of the 3300. I will try the load command tomorrow morning. Thanks

There is nothing programmed into the associated directory number assignment. Does anyone know where the dtmf receivers are located on a peripheral cabinet I thought they resided on the SW Cont card.

I have a mitel 3300 mx with a peripheral cabinet the controller is running 6.0.5.7. There are 3 16 port ons in the peripheral cabinet, when you go off hook on any of the 3 cards you get a automatic busy signal and in the logs of the 3300 I get this error on every time I go off hook. Software...

System Admin voice mail voice mailbox config click on the mailbox you want info on and then click change, if you scroll about half way down it will show you number of new saved and max messages.

Does the polarity matter on the embedded ls ports on the 3300?

I have a couple of 3300's that after the user hangs up the phone the system will keep the phones lines busy until either a manual reset of the system or a bu and rts of the lines in the maintenance commands. When the maintenance command rts is used it takes the system about 2 minutes to fully...