Search results for query: *

Can USB support be added to NT4 w/o upgrading ro W2000?

Step one: Turn off EVERYTHING in your home, EXCEPT the computer. step 1.5: go to electric meter and record the reading. step two: Use computer as you normally would. step three: after one day, go outside to your electric meter and record the new reading, subtract first reading from the new...

If you don't have "C,A, AND D or Q" as boot sequence options in the BIOS, then you cdrom driver is not loaded and you will need the file "Mscdex" to load the cdrom driver. NTFS is more stable than FAT32.

Being a user of the internet for 6 years, I have paid a total of $9.95 for ISP service. The technology is there, and they, the cable and phone companies are more interested about what is in your wallet. A new V.92 modem is now availalbe, well it only transfers faster, not receives faster, but my...

Although my 56k modem works fine and I am really not in a hurry, I wonder, why did they stopped at 56k, why not 112k modems, 2 meg modem, etc. So why couldn't I not adjust the FIFO transfer rate in the registry from 8 to 16 bytes. By default the RX(Receive) FIFO is 8 bytes and the...

Been there and done that! You should be able to do a test run and that would determine record/transfer speed (run test/copy). Disable the PC's screen saver. If it activates during a record the transfer rate may decrease and cause a buffer underrun or (coaster). Close all applications, except cd...

Hello, I am using one of tyour threads to respond to your responce. When you said 'REG_DWORD' what do you mean. Do I change HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\MemoryManagement\SecondLevelDataCache from 0 to 1024 or do I create another variable. This was about changing NT L2...

In reading some NT tips, it said the NT's default will not reconize L2 cache, but changing a certain value in the registry to '512' will do the trick. Has anyone come across this issue?

My BIOS has two options for Sdram timing, 2 and 3 cycles, can someone tell me what that means and which one to use, am running a 350 mhz AMD k2 and 100 mhz front bus speed. I use sdram 100 mhz, 288 megs total, 2 128's and a 32. Also, will 133mhz and 100 mhz sdram work together on the same board...

WHEN ZONE ALARM POPS UP AND ASKS PERMISSION TO 'RECEIVE' OR 'ACCESS THE INTERNET' HAVE YOU EVER CLICKED 'NO' AND 'REMEMBER THIS ANSWER THE NEXT TIME I USE THIS PROGRAM'? IF SO, ZA WILL NEVER CONNECT TO THAT SITE UNTIL YOU CLEAR IT AND GIVE THE O.K. TO CONNECT. Step 1. Open the ZoneAlarm...