Search results for query: *

Awesome, thanks! Google turned up an FTP link before too, but it wasn't actually working when I tried it. No idea if it was the same link or not.

Oh, you mean the firmware that comes with the updater. I think its B25, quite old compared to B76

I found the TFTP / modified BCM proxy server for actually updating the firmware there again (the actual link in the original thread is dead now, but it didn't take much looking to find it again), but I didn't find any firmware versions. Do you know where the actual firmware would be there?

I use a bunch of phase 0 / 1 nortel IP phones with Asterisk, and use the tool mentioned in this thread http://www.tek-tips.com/viewthread.cfm?qid=1576084 to update the firmware on my stock of old, but NIB sets when I start using them. Recently the drive I had that tool and a few versions of...

Oh, one other question I forgot, is there a way to get these phones to check for firmware updates without the windows software just by pointing them to the TFTP server through DHCP? The documentation with the tool says the old firmware only supports TFTP, which would be fine for me if there was...

Thanks, that worked great. Does anyone have any firmware older than B76, and ok to put on release 3.0 phones, but newer than the B25 that comes with the updater? At least the softkey reset sequence actually works properly now, which was the most annoying thing about the old firmware. B25 also...

Gwebster: On Nortel's site, it specifically says not to load B76 on release 3 or 4.0 phones, it's for release 4.5 or higher. All my phones are release 3. Firebird: thanks for the link, I will try it out right away. Andrew

Hi Back in 2006, kgrant posted that he had a tool to emulate a BCM on a PC to upgrade the firmware of a Nortel I2004 Phase 0 IP phone. The thread is here: http://www.tek-tips.com/viewthread.cfm?qid=1193466 kgrant, I tried sending you an email about this to the address in that thread, but I...