Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. DisIzMe

    Tracking startup

    Ditto to Wolluf's suggestions.
  2. DisIzMe

    Tracking startup

    Are both machines equal in memory and have you recently defragged your hard drive? CTRL-ALT-DEL and then click on "Task Manager" to see running processes and to see how you're using the memory. Unless you have Norton Utilities, Click "Start", "Programs&quot...
  3. DisIzMe

    Windows always reboot before startup complete.

    I've tried using repair disk created on a similar machine and it didn't work. However, with that said, give it a try, it's only a floppy disk and takes seconds to create. To me, the issue sounds more like a hardware issue than either a software or driver issue. If its not an overheated...
  4. DisIzMe

    Windows always reboot before startup complete.

    Don't know if this will help but I've seen this happen when the CPU temperature "stop" setting in the Bios is set too low. Is your system running warm to hot? Make sure it can breathe (plenty of circulation) and bump the setting a few degrees to see if it stops re-rebooting.
  5. DisIzMe

    win2k install woes - freezes on splash screen

    I've seen this occur when I had two pieces of hardware attempting to use the same IRQ and/or talking on the same channel at the same time. Check your bios settings (press delete key when first booting) to see if IRQs are loaded by operating system PnP. Also, check your master/slave settings on...

Part and Inventory Search

Back
Top