Search results for query: *

Finally the issue is resolved " the service provider had done some changes in the PRI link Config at their end"

Hi TouchTone I tried the suggestions but still the same issue whnever i make an outgoing call the call is ringing at other end but i am not getting any tingback tone and when answered there is no voice path.To add if i see which channel has been used for this call i dont see any channel in busy...

Hi Everybody I am facing an issue with IPO 500v2 which has an PRI link connected.The PRI link is up and incomming is working fine.The issue is with Outgoing.I have created an System Short code of 9N;/dial/Ns2929000/LG-ID.When i dial 9 followed by the number in Status monitor the dialed digit is...

hi the default ip route information 10.80.0.128 ,10.60.0.128 etc are automatically getting populated whenever i add an expansion in different subnet. As per your saying probably something with firewall.then my doubt is how the PC is able to ping or reach the destination ip.The IPO primary server...

The traceroute from primary gives the first hop as .19 and then gets unresolved until 30 hops.The same when i do it from PC it is like this Tracing route to 10.80.0.131 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 10.0.8.19 2 6 ms 6 ms 6 ms 172.16.0.44 3 7 ms...

Hi Everybody I am stuck up with the following issue being faced in IPO SE solution.Would appreciate if any body in this forum has come accros the same.The site is having an IPO primary server in 10.0.8.0 subnet with gateway as 10.0.8.19.Recently we had added an 500v2 expansion to the solution...

Hi Guys WOuld appreciate your help with the below described issue being faced in my IP office SE Rls 9.1, Briefly this is the site setup the customers HQ location hosts the IPO SE and have all 1608-i and 9608 phones working normaly with no issues. The customer has an remote branch connected...