Search results for query: *

thanks for the reply much appreciated! This is good news! I have put in place two of my DL380G3's like this config, and they are working fine. I guess also the fault tolerance would work the other way too? If the 6402 failed, I could put the other drives back onto the 5i+ integrated controller...

I have a DL380G3 with a SMART 5i+ controller in integrated duplex mode. x6 Ultra 320 drives, 2 boot the os (W2K3) on port a, and 4 are on port b for data. I have since installed a 6402 controller (128mb) as the 5i+ is downgrading the 320 drives to 160mbps. I have moved the data drives onto the...

Hi I would like to permit an ip address of a wap phone onto our pix 515 firewall, so that the phone can syncronize with our exchange 2003 server using active sync. I would prefer to do this rather than open up port 80 to the whole world, as our exchange server is sat behind the firewall and we...

Hi When I connect to my office lan over Cisco VPN 4.03 (c) software, I receive an error code of "422 terminated locally by the client" I can connect to ISP fine, and tunnel onto the vpn after successfully logging into the pix and the radius server, but then I cannot ping anything and...

guys, thanks for all your help, problem now solved, found the problem to be a "global (outside) statement" was causing a conflict. removed this statement and all ok

thanks for your help

thanks, yes I have. I was trying to find the answer to whether the dc's should point to each other for dns. I have since found on a couple of forums that if you have more than one dc/dns server in a single network best practice is to point a to b and vice versa Thanks

Can someone tell me if Windows 2003 servers should point to themselves for dns or at an alternate server? e.g, two dns active directory servers in one ad domain, a points to a for primary, a points to b for its secondary. vice-versa According to Microsoft this is the case, but I have found the...

Hi I cannot seem to get windows active directory traffic to pass through our pix firewall. I am using the default lists that is on the pix as I am not sure what I should be configuring regards access lists to all dns resolving, internet browsing and smtp email. I can ping the outside world from...