Search results for query: *

Hi all I have problem with Call Forward and Hunt at the Meridian Network All Nodes have Rel.4.00T Deplist 9 If a subscriber of a any Opt.11 (H323 Endpoint) set a Callforwarding to another Subscriber in the network par example to 111 or Callpilot which were located on CSE or to any other...

Hi all I have problem with Call Forward and Hunt at the Meridian Network All Nodes have Rel.4.00T Deplist 9 If a subscriber of a any Opt.11 (H323 Endpoint) set a Callforwarding to another Subscriber in the network par example to 111 or Callpilot which were located on CSE or to any other...

Hi all I have problem with Call Forward and Hunt at the Meridian Network All Nodes have Rel.4.00T Deplist 9 If a subscriber of a any Opt.11 (H323 Endpoint) set a Callforwarding to another Subscriber in the network par example to 111 or Callpilot which were located on CSE or to any other...

Hi I`ve found it. New route 10.2.1.2 10.0.1.200 0 1 Then reboot the main cabinet After that cabinet 1 connect to Main => prt route Cabinet # 0 ID Destination Gateway Port 1 10.2.1.2 10.0.1.200 1 Cabinet # 1 Route entry(ies) not found. No database...

Hi The Opt.11 is a new switch. The IP Daughter board in the remote cabinet are on port 2 the bottom daughterboard slot of the CPU. The Opt.11 is now in my Labor and I test it. Both cabinets are ok with crossovercable or plug into a layer 3 switch. I can ping both remote cabinets from LD 117...

The M2616 is on a hardeware port where nothing is configuered. With a special prodedure it is possible programm the Phones from each phone. Model? mean what typ of model you have.

I can`t enable route.It is a SCC with Daugherbord Ntdk83 and Ntdk99 I can ping only the cabinet 2 which is ok over crosscable. Main cabinet and Expansion cabinets do not answers on pings from any other Host in the Network.(See LD 117 ping ipAdress) I have monitored with sniffer. When I make a...

Hello Use ld 27 prt tsp DSL c u tflwkr

Anyone have any information on this? I am trying to configure an IP Expansion cabinet over a customers data network.I have an Opt11C Rel 25.40b Configuration with a Crosscable - no problem ! Configuration over a Cisco 3600 Router, Main cabinet and expansion cabinet do not connect. Main cabinet...