Search results for query: *

I have a main CS1000 rel 7 connected to a Cisco UCM rel 8 via qsig. Also have several 1000B's connected to the main CS1000 via sip. A 1000B TDM phone gets reorder when dialing a Cisco phone , yet a Cisco phone can call that same TDM phone. This happens at all my branches. I need help...

Thank you .... that certainly explains it.

I have 3 branch offices with ip phones, one of my branch offices has a very high 1140 failure rate. (nearly one a week lately) The screens go blank and the back of the phone feels warm. Could this be a poe issue ? How much power should an IP phone draw ? As always , any assistance is appreciated.

My NEC rep advised they are no longer accepting orders for new PS3 wireless phones... does any one know of a vendor still selling them after 3/31/11 ?

A thread last month addressed this ... it worked for me with TM 4 ,not sure about 3.2 http://www.tek-tips.com/viewthread.cfm?qid=1633216&page=40

Another fix : C:\Program Files\Nortel\Telephony Manager\Millennium\Web\Execs\mfDateHT.inc open the text file mfDateHT.inc find 2010 and change it to 2020 you're good for another ten years.

Yes, I am having the same issue.

Yes , we did have some UPS issues at this site... I'm sure the switch had some "less than graceful" shutdowns.

On a 1000B 4.5 I am unable to login to my call server when telnet to the sig server.. oam> cslogin connect: S_errno_ECONNREFUSED oam> has anyone ever encountered this and do you know a fix ? Thanks

Will I have to out the trunks and then rebuild them if I do that ?

I have a 1000B connected to a 1000M via sip trks. The 1000M has call pilot with auto attendants and the attendant consoles. The 1000B has local trunks for out dial . Trouble is,called parties call the office using the caller ID of the out bound trunks. REQ: prt TYPE: rdb CUST 0 ROUT 0...

AIOC

Our company just did an upgrade from 3.1 to 4.0 also.. the vendor told us we must upgrade 3.1 to 3.2...then upgrade 3.2 to 4.0. ... is that the procedure you followed ?

since 310 is marped on 659 it will "follow the rules" of 659 the rules say forward no answer to 390...

it would certainly verify the carrier is allowing 011 calls

Have you tried direct selecting a trunk from a maintenance phone and dialing an international call ?

Thanks for the info

We have a 1000B with tdm phones. tied to a 1000M via sip. This office is closing and we will be powering down the system and removing it. My question is : What steps or precautions should I take ? What programming changes need to be made to the 1000M to avoid alarms ? Thanks

Thanks for the info ... seems that command don't work for PS3 ...do you know how I can adjust the busy/no answer timer on wireless phones ?

I know there is a command in the IMX that allows you to change the call forwarding timer on a per station basis. Please give me a clue. Thanks Ron