Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Aaron5

    Add column headings with TKinter grid and centering

    ...10", "Bin 11", "Bin 12", "Bin 13", "Bin 14", "Bin 15"] onList = ["Bin 3", "Bin 12", "Bin 14"] myFont2 = font.Font(size=10) label= [0] * 15 for x in range(5): # Number of Rows for y in range(3): #Number of Colums frame =...
  2. Aaron5

    Speaker phone not op one port, ticking sounds, Vertical Summit 80

    After re-initializing this particular port the problem cleared.
  3. Aaron5

    Speaker phone not op one port, ticking sounds, Vertical Summit 80

    This is a first for me. The customer has been complaining about this phone making ticking sounds. After switching wiring pairs, testing with a new VU9208 phone, and testing the phone at the switch/KSU port, I realized something is odd about the port. The speaker phone will not operate. Testing...
  4. Aaron5

    Blinking Message & Call Back LEDs, Pulse dial tone, No Messages. Vertical Summit 80, VU-9208 Phn

    ...Back? (not in manual) Leave yourself a message then try deleting again - Could not leave myself a test message, vm doesn't pickup. SPEED * * to delete all messages - What is the button sequence to use Speed * * ? Is it: Message/Call Back, Speed * * ? The message display on this phone is...
  5. Aaron5

    Blinking Message & Call Back LEDs, Pulse dial tone, No Messages. Vertical Summit 80, VU-9208 Phn

    What might cause Blinking Message & Call Back button LEDs, and pulsing dial tone when there are no messages present in voicemail? Any advice appreciated.
  6. Aaron5

    Vertical VU-9224F Phone lost button assignments, Summit 80 sys

    Thanks curlycord, Would the software corruption on the port be permanent? I need to do a system backup and upgrade soon on this system. I'm going to reprogram the buttons and keep an eye on it. I'll explain to the customer it is very unusual. She may have tried moving her desk phone to a...
  7. Aaron5

    Vertical VU-9224F Phone lost button assignments, Summit 80 sys

    What might cause a VU-9224F 24-button phone to loose it's user's button assignments? They were all assigned to other user station numbers. The other VU-9224F phone in the same system has had no problems. The system is about a year and a half old. I have not seen this happen in other Summit 80...
  8. Aaron5

    Going On Hold gives intercom dial tone, Vertical Summit

    I can't seem to find this option in the station programming. I would like to program Hold/Save station buttons to place the CO call on hold, Without giving the intercom dial tone. Any advice appreciated?
  9. Aaron5

    Give access to COL 4, all station ports, in an NEC Electra Pro Level I

    Resolved. (Manual, programming, P. 2-107) I enabled the Line key 4 for COL access using 'CO Line Selection(Installed, DP, DTMF)LK3, Data No. 10. Changing the Setting data to: MF restored the LK 4 CO line access.
  10. Aaron5

    Give access to COL 4, all station ports, in an NEC Electra Pro Level I

    Thanks Belevedere. I do have the original 378 page manual (with programming) for this system 'Electra Professional Level 1' 1998. I have been programming and managing this system for years, just have never added a trunk line. Other NECs like this we serviced over the years had access to at...
  11. Aaron5

    Give access to COL 4, all station ports, in an NEC Electra Pro Level I

    I have added a 4th CO line to an old NEC Electra system, and just found out none of the phones (Line 4 button) will actually Select the COL 4. Additionally, no station rings, and no Line 4 button lights on incoming ringing COL 4. I have tested the CO line at the modular plug going into the...
  12. Aaron5

    Feature button flashing. NEC Electra Professional Level I

    It looks like a faster rate, maybe 2/Sec So maybe it is DND Set or Call Forward Set. LED indicator guide attached.
  13. Aaron5

    Feature button flashing. NEC Electra Professional Level I

    Does anyone have any idea why a feature button would flash, the phones user does not use any special features. I haven;t found this answer in the station user manual yet. Entering: Feature 69 Feature did not stop the flash. Any advice appreciated.
  14. Aaron5

    Automated Attendant Delay Ring Assignment, NEC Electra Professional Level I

    I could use a bit of advice on setting up Automated Attendant Delayed Ring Assignment. I believe this is the correct feature for what I need, to have select station ports ring with CO lines, If ports 01 & 02 fail to answer CO/PBX line rings for > 10 Seconds. So far I have Programmed: LK4, Data...
  15. Aaron5

    Give full Access to COLs to a Sta #, NEC Electra Pro Level I

    Thanks Belevedere
  16. Aaron5

    Give full Access to COLs to a Sta #, NEC Electra Pro Level I

    I've been studying the programming section of the manual, to allow a user Free Dialing. But I can't seem to find the reference to "Is Line Restriction Free? MB 3-12" shown in the flow chart. I simply need to give full COL access (Free dialing) to Sta #23 (or any future station). Any advice...
  17. Aaron5

    Using ORDER BY and SQL syntax

    Thanks strongm. No schema.ini file, but. You had me thinking (about formatting) so I thought about the field in the DataReport I am sending the recordset items to, is causing this time format. The field was set to DataFormat General, so I set it as Custom format, with "hh:mm:ss", Then VB6...
  18. Aaron5

    Using ORDER BY and SQL syntax

    ...PM,4/26/2015 10:26:08 PM,00:06:35 Specifically sorting by the Elapsed values using a common ADODB recordset, using this SQL string: "Select * FROM " & "labData.csv" & " ORDER BY " & "Elapsed" This works, except that using the above SQL converts a value like 00:15:30 (15 minutes, 30 seconds)...
  19. Aaron5

    Access 2003 Looses Zebra LP 2844 Printer Portrait/Landscape control, suddenly. (A minor bad dream)

    So I should maybe clarify, since I could not edit my post, when creating/editing a label in Access, the Print Preview and Layout Preview will not display the lines of text over the length of a 2 or 3 inch wide(by 1 inch High) label for example, unless the Page Setup's Orientation is set to...
  20. Aaron5

    Access 2003 Looses Zebra LP 2844 Printer Portrait/Landscape control, suddenly. (A minor bad dream)

    Strangely, sometime after installing a new driver for an LP 2844 printer (that had been reliable for years), and creating a set of new USPS like label reports, I apparently lost Portrait/Landscape control. Killing a huge set of inventory & product labels that have been used with the LP 2844 for...

Part and Inventory Search

Back
Top