Search results for query: *

Hey kids... Tied up with a client today so I won't be able to work on this until tomorrow, but 2 quick things: Textron68 - Yes, CarGoSki recommended doing a Print earlier in the convo - but I don't have a serial printer set up as ttech described. WinSPM seems to be the best solution here - I'm...

I *THINK* I got it...... Googling around, I found http://www.tek-tips.com/viewthread.cfm?qid=676185&page=229 I checked out Table 17 & Table 18 (what TTT refers to as Route 17 & 18, respectively), both were blank. I set Table 17, Route 1 & Table 18, Route 1 to Pool 70. I'm not celebrating...

Textron68 - Default Pools: Thanks for narrowing the scope!! I went thru EACH pool, the ONLY pool with any lines assigned is pool 70. Those lines being 1 thru & including 8. I tried to enter random pool #s (e.g. 859) and the system would 'boop' at me. Back to basics - I wanted to make sure I...

Gotcha. I found my WinSPM CD... I located the port on the processor card... Now I'm looking for the cable & connector. This may take a little bit - or I may have to order it. Stay tuned & THANKS!

Ahh, a serial printer. You beat me to it - that was about to be my next post. I was hoping it would print to screen as well as to a printer (which I don't have set up), alas, after a few minutes of staring at 'Print in progress....' I figured that wasn't going to happen. I will check out WinSPM...

Hold the phone! (ba-dum-bump) First, I found an article that said I have to REMOVE the line from its existing pool before I add it to another SO..... I went back, same steps, entered pool 70 instead.... lines 1 thru & including 8 were lit up but lines 9, 10 & 11 AREN'T. How do I scroll thru...

CarGoSki & MerlinMan thanks for the replies! Yes, it is only 1 line. I definitely get the CONCEPT of what you're both explaining.... but I'm confused as to how / where to create this! I just went to x10: 'Menu', 'System Program', 'Start', 'LineTrunks', 'Pools', entered '890', and this is...

...selected but in general, it seems as though it selects from the end of the group (lines 9, 10 & 11) instead of the beginning! I tried using the *14/**14 feature on x10 but that only succeeded in changing that extension FROM: picking up SA-Ring / SA-Voice / SA-Orig & having to dial 9 to get...

Thank you both for your replies... If you have a mail filter try putting them on the whitelist and see if that fixes it. -- Only using IMF & McAfee AntiSpam module via GroupShield. I was going to add the sender's email server to IMF's accept list but there are about 2 dozen server IPs. And...

...people have encountered the same problem but I've just never been notified... I am STUMPED!!!! Any help & guidance would be greatly appreciated! Thanks in advance! ******************************** Note: This is NOT a cross-post. This is the one & only place this question / problem is posted.

mhkwood..... you are BRILLIANT!! This is PERFECT... it works FLAWLESSLY... I'm thrilled! I also found http://www.isaserver.org/img/upl/vpnkitbeta2/cmak.htm that provides step by step images too. And the fact that it's called a 'connectoid'... that just amuses me. ;) THANK YOU THANK YOU THANK...

This is fairly simple with the proper tools, impossible without. -- Oh good. I was afraid it was one of those 'put a check mark here' type solutions where I was going to feel like a complete dope for not figuring out how to do it. ;) You need to use the Connection Manager Administration Kit...

My boss connects to one of his offices using Windows VPN client - the whole set up is no frills - all very vanilla. He then uses RealVNC 4.1.1 to take over his desktop. I have been informed taht this is "too many steps". Is it possible to have RealVNC automatically launch immediately after a...

It's 'lassie'. And Skip may have 'senior moments' but I'm a blonde. So we all have our handicaps.... ;)

Clearly I AM pissing people off but it's completely unintentional! Again, I'm so sorry - if you read those posts I DO take time to say thank you but I guess I wasn't doing it 'properly' via the purple star. Of the 18 posts, 1 was to the wrong forum (couldn't figure out how to remove it - so...

It wasn't a wasteful post. I appreciate everyone's input & advice. Just to be clear - I posted to both places simultaneously - just before leaving at the end of the day. Iin the morning there was a reply here & a reply there. Had I already gotten a reply there then I would never have...

It didn't occur to me that it would / could be a specific per table setting vs a general Word option. Makes sense now that you say it though. Also I found a note at http://word.mvps.org/FAQs/TblsFldsFms/ControlPgBrksInTables.htm that mentions having the creator disable the table break option...

A client sends us .doc files that are created in 2002/2003 with large tables. When viewing the docs in Word 2002 or later the tables split nicely between the pages. When viewing the docs in Word 2000 it doesn't get split up & runs off the end of a single page. I found that if I go to Table...

...in pools, and the extension that has the individual lines is the Operator extension, which is the only type that can have them individually. -- I *thought* the only extension that was allowed the individual lines was the Op ext but someone told me otherwise, hence my failed attempt. Swap 210...

Using a Merlin Magix system & I want to program one POTS line (outside line / trunk) per button on a particular extension (x212). Currently the only extension that has a POTS line per button is x210 - but no one sits there! When I get in to the programming mode on x210 the buttons with the...