Search results for query: *

phoneguy nailed it...swapped out the amp cable and everything works like a champ. Muchas gracias Amigos.

Well that didn't resolve the problem. I'm going to try a different card.

Yes, I have verified dial tone all the way. I'll try punching down to the violet/slate and brown pairs...Definitely worth a try. Thanks folks.

So I tried as you suggested and still no joy. Put the card back in the original slot and then after a few minutes received a 52-02-2 alarm. I'm beginning to suspect the line card as well.

Kinda knew it couldn't be that simple...hmm.

One thing I just noticed...After rebooting, when I perform a feature *0 and select the line, then select SHOW, it displays a "not in service" for a few minutes and then "not redirected". Could this be a flaky line card?

Well, punched the line down to 003 and assigned 003 to appear&ring on 221. When performing a *0 I see the key assignment to 003, but if I go off hook and press the key...nothing....no dial tone and the display says "Line001 TRANSFER". It must be something I'm overlooking I think as I'm not a...

Will do. Thanks again.

Thanks all. Trunk card is in the right most slot, but here's the thing...That's the only card in the MICS other than the NVRAM card. It is configured for Loop and I can dial other DNs (222), just no "connection" between the stations and the trunks. I've confirmed that dial tone is on the trunk...

Greetings All, I'm working on a small MICS system and I can't seem to dial out or receive incoming calls on the analog trunks (L001 and L002). DN221 has line assignments for both as Appear&Ring and Prime Line assigned to L001. Line001 is Trunktype:Loop, Linetype:Public PrimeSet: 221 Trunk...