Search results for query: *

Just picked up an emachine and the audio is, I would say about 10 percent slower than it should be. It is all audio...cd...radio...etc. Any help on this would be great...Mike

Luv2ski and westcoater: I tried to access the OS/2 operating system with an I/T frind of mine and could not get in with the info you gave me. There was no nic card on the bottom of this Nam, and the other connections would not let us in. I hate to admit it, but I gave this back to the customer...

DHCINC. If every cable is terminated on an 8-pin jack, if I need the W/OR or W/GR or W/BR for voice purposes, it can get real messy. cwc3, icc's website???

The whole building (voice and Data) will be cat5. I want to terminate all cat5 on bix blocks so I can use any cable for voice or data.

It was originally 3 digets.I have changed from 2 to 3 digits and 3 to 2 many times .

The Nam was originally 3 digets and I have changed from 2 to 3 digets and back to 2 many times.

Should I try your procedure?

Westcoaster: you shut the system down using f 916..."ok" you go into **xftest and remove any inactive feature codes..."there were no "inactive" codes." you verify the dn length on your system by dialing f*0+intercom..."2-digets" you power up the nam and wait for it to "sing"..."OK" you go...

Can you use the same cat 5 cable as the jumper wire?

Steve...F916 works.

Beginning to think this Nam is corrupt. If anybody disagrees, Please let me know...Mike

916...ok with default password. F983 I get the log prompt.

Xftest is ok. F9*1 is ok. F983...invalid password. I am working with 2 digets. Reboot...reboot...reboot.Bottom line is I can not get into F983. Did the F985 "9" to reset password many times.The Atdt.in f982 is stuck at 2 digits. TOTAL FRUSTRATION...Mike

F901 does not work.

What would be the correct way? And what do you mean by "headroom"?

Is there any problem terminating a cat5 cable to a bix block, and then, using cat5 jumper wire, x-connecting to a bix 46DI patch panel?

I performed a stratup on the ksu and it came up 2 digit. Plugged the Nam in, it came up no problem. Did a F983 120000..."not allowed" This Nam is really starting to get to me...Mike

1.1st performed startup on Mics R1T1 Ksu I was able to access f983, then perforfomed a reset on the Nam to factory settings.(reinstall) f983 is asking for a password. 2. The config password is 266344. 3. I hooked the Nam up to a different Ksu in my lab.Same software(R1T1) 4. Ya, f916 threw...

Tried the 2 diget thing....no go.f980...981...982...985...all ok.No f983...Another strange feature code that came up was f916, which works the same as f915...hmmm.

Yes...everything.I'm almost at the point where, if there is some kind of battery in the nam...SHORT...SHORT...SHORT!