Search results for query: *

Hello! I've been assigned a task to setup an AP to be public but with a ticketing system to let the users access the internet. The case is as follows: The local library has got one AP that's up and running with WPA for the users in the office. I want to create a second ESSID with a different...

I´m trying to speed up the backup but I´m stuck with 50-60 Mb/min transfer rates. According to specs. from Dell the PowerVault is capable of around 10 Gb/hour = 175 Mb/min. We´re using BUE 9.1 Sp5, PowerVault 122T and a Adaptec SCSI Card 39160. If someone could point me in the right direction...

I want to print the following: Directory number, equipment and name I can´t find any form that has got that setup. Is there any form for that or is there any command that I can use to get that info. Can I make my own forms? Per Elofson, IT-tekniker/ http://www.kringdata.se

It´s shown from the sets, I wan´t to disable it for the whole PBX. In what LD can I see the clid?

I don´t want the PBX to show it´s phonenumber when a outbound call is made, how is that achieved?

Sorry!! I found it! :) Some times you can´t see the forest for all the trees...... :)

How is that done? I can´t find anything about diagrams in enterprise manager.

The problem I have is that I want to get the username from one database and the amount of messages for that user/s from another, the two databases are on the same server and the db_owner has got access to both databases. I´m looking for a way to see the database relations between diffrent...

Firebird scrambler, I´ve changed the path to STRING C_FILE="C:\PROGRAM\SYMANTEC\PROCOM~1\ASPECT\COM_FILE" and it worked! Thank you very much for all the help and the script. Is there any other script that you like to share with me to make my daily work a little bit easier? Regards, Per Elofson...

Firebird Scrambler, I haven´t got the COM_FILE folder in the ASPECT folder, how should I set it up? Do I only have to create the folder? Am I missing a file? I´m also getting an error dialog box saying: "Error 5: Invalid identifier

I haven´t got admin right for LD 50. Isn´t ENTC a function for the LD 80? However I can´t get the script to work, it looks like this: proc main loop: transmit "trad 8 0^M" ;change xx to your tn pause 3 goto loop endproc I´ve tried this on my own TN (8 0 2 7) but I can´t see anything...

Is it possible to trace an external call with this program? The 5972 extension is a CDN, does that cause a problem when tracing?

What am I supposed to get out of that command? Is there a polling interval involved? I´m reading in my maintenace book from Meridian and it says something about "enhanced trace command", do I have to enable that for the specific DN/TN? I typed this: "trac 0 5972" and got this in reply: "tra122".

Wé´re having trouble with an ACD-queue and I would like to monitor incoming calls on DN 5972 and see how/where it´s routed, how do I do that?

We have had a system error and we need to make a systembackup from our Sony sdx 420 storstation, the problem is that we haven´t got any boot disks for the tape drive. It must be possible to do a recovery from tape when you can make a systembackup?

We´re using Genesys 6.5 and our PBX is a Option 61 with a Meridian Link card. We´re only interested in the ACD-queue statistics and not the ACD-positions.

Oki, could there be a misconfiguration of the phoneset? The agents in the 8210 acd is digital and the ones in 5999 acd is analogue. FYI, we are not using printers or capture PC´s, there is a Meridian Link in the PBX from witch we get trafficdata over to our Genesys system, in the genesys we...

Here it is. TYPE SCB CUST 0 CPRD 01 01 12 31 SHR 7 EHR 22 DOW 2 3 4 5 6 7 RFRQ 3 SFRQ 2 ROPT 1 2 3 4 PRIO 8 PAGE YES AID YES IDLB 0001 IDUB 9999 LOG 500 SRPT YES TOT4 YES

We are using Genesys as our callcenter platform, we have got a couple of ACD-queues from wich we get statistics, thoose queues were made by our supplier of the PBX so I don´t know how it´s set up. I´ve been looking at a working ACD and that one NOT working but I can´t really see the big...

I´m trying to update my boatclub members database, the problem is this: The members table is imported from excel and it looks just like I want it except that it hasn´t any information about the members boatwidth. That info is in another excel-file that I´ve imported as a new table without...