Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
AX100 HBA WWN is not long enough ! ?
This is only a test box anyway. the Ax100 only has 3 disks in it at this time, so I wont be putting anything critical on there just now. Thanks for the advice though. Ill have plenty to get on with tomorrow now. -
AX100 HBA WWN is not long enough ! ?
Probably not. Gotta be worth a try though isnt it? -
AX100 HBA WWN is not long enough ! ?
Oh. I was hoping to configure this and any LUN assignments before I install an OS on the PC. is this not possible? -
AX100 HBA WWN is not long enough ! ?
Ok, sorry for my ignorance on this, but Where do I get those from. I only have the WWN of the HBA in the server What are the other things you mention, and where will I find them? -
AX100 HBA WWN is not long enough ! ?
Hello everyone. I have an AX100 and am trying to attach my first server to it (Point to point at this stage). in Navisphere express, I am required to enter the WWN of the HBA im using in the server, and by default the entry is shown as 01:01:01:01:01:01:01:01:01:01:01:01:01:01:01:01 (16 x 01)... -
Using a 1003 as a cable Router
I have acquired an old 1003 (IOS Version 11.0) router, and wonder if it is possible to configure the ethernet interface so that it gets an IP address from DHCP (The Cable modem), and serves up IP addresses on a "secondary" configured interface to internal LAN clients. I could then plug...
