Search results for query: *

hay hold on i am not an ediot burt i have the books i need only testking and about cheating cisco guy 33 i am just want to test my self before getting into the test i have expert 5 years with cisco and dont need "paper" ccnp i am vpn spec. and aeronet spec. and many u will not imagin thanks all...

hay hold on i am not an ediot burt i have the books i need only testking and about cheating cisco guy 33 i am just want to test my self before getting into the test i have expert 5 years with cisco and dont need "paper" ccnp i am vpn spec. and aeronet spec. and many u will not imagin thnks all

thanks Burt but there is nothing for BCMSN

hi all plz help me i need free sites to download BCMSN testknig v 3.0 please if any one had a link send it it will help me in the exam moustafa kaid ccna commium group

you have to permit telnet by the following command telnet 10.0.15.0 255.255.255.0 inside moustafa m. kaid ccna commium group iraq

u mean password for telnet ?

hi all please i need someone to help me i have pix 506e i make the following steps to access remotly to the pix from the outside interface ca zeroize rsa ca save all domain-name cisco.com ca generate rsa key 768 ca save all ssh 90.153.204.74 255.255.255.255 outside ssh timeout 30 is there...

listen to me wilson lets see this case first we have 2 sites A B and have IPsec tunnel between them inside ( 192.168.0.0/24 for A )(192.168.0.1/24 for B ) so we will make an access-list for permitting host in A to comm. with host in B and vice versa in B ok but there is very important note...

10.133.32.203 u have no such subnet in the pix interfaces take this hint for you if you have static nat to the printer from the inside of pix to the outside you have to permit lpd port for incoming traffic to the natted ip not the real (that is a common mistake) if need any help send me config...

first of all would u send the configuration you can make static nat by the following CLI static (inside,outside) outside ip mask inside ip mask for example you want clint 192.168.20.20 to go out with 192.168.30.30 static (inside,outside) 192.168.30.30 255.255.255.255 192.168.20.20...

ok thanks

hi all i have cisco pix 506e configured as vpdn server as following route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1 access-list inside_outbound_nat0_acl permit ip any 10.100.100.192 255.255.255.224 nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 1 0.0.0.0 0.0.0.0 0 0 global...

is pix 5510 work on IOS7 (i mean did it support) hub and spoke Regards, moustafa m kaid ccna commium group iraq

yes but i need an example if you have to the config i dont know the site is not opened regards,

yes thanks i think about 5510 or 5520 thanks alot

thanks mr brent for answering me actully i got 18 peer 506e and they r full meshed each pix have vpn tunnel with other 17 but it take 80 % of memory so i am afraid to slow down the traffic if any more peers added and u know 506e allow me max 25 peer so i need 515 hub and spoke configuration and...

you will need default route fon internet connection do it as following route outside 0 0 192.168.1.7 (next hope router) and about ping the netgear u have to make an access-list as following access-list 102 permit icmp any any access-group 102 in interface outside hope its working with you...

hi all i have 3 cisco pix firewall 506e configuered as the following A------vpn------B------vpn------C this means a connect b with ipsec tunnel and b connect c with ipsec tunnel but there is no link between A&C 1- is there is a way to route between them using B site not ordinary route (vpn...

hi do the foolowing to see what ip ur going through outside sh xlate this command will show u the bufferied natted ip Regards moustafa m kaid ccna iraq baghdad